Table of Contents
Advertisement
Sensepoint XCD RTD Technical Manual
5.3.2 Remote Sensor Mounting
A remotely mounted sensor should be mounted using a suitable junction box or approved
electrical conduit scheme. For further details regarding mounting sensors to suitable
junction boxes refer to the relevant sensor manual.
To remotely mount the sensor, follow the procedure below.
1. Select a suitably certified junction box.
2. Fit the sensor to the junction box (refer to sensor manual)
3. Connect the junction box to the transmitter using suitable cable and cable glands
Note: The maximum cable length between the remotely mounted sensor and the
XCD RTD transmitter is 30 meters(100 feet).
4. Terminate the wires from the sensor in the transmitter as shown in section 6.
3001G0496
Diagram 7: Remote Sensor Mounting
E
02/NOV/09
Modify
Text
J.Y.JIN
13
SPXCDHMRTEN Issue 1
NTS
D
C
B
A
29/OCT/09
27/OCT/09
08/OCT/09
17/JUL/09
Remove
Change
Add
New
Adaptor
Title
Sheet4
Drawing
J.Y.JIN
J.Y.JIN
J.Y.JIN
J.Y.JIN
SA
17-Jul-09
Sensepoint XCD
RTD Transmitter
Installation Drawing
3001G0496
- Quick Links:
- Zeroing and Span Calibration
Hide quick links:
Advertisement
Table of Contents
