Supermicro X11DDW-L User Manual page 98

X11DDW-L/NT User's Manual
PXE Boot Wait Time
Use this feature to select the wait time to press the <ESC> key to abort the PXE boot.
The default is 0.
Media Detect Time
Use this feature to select the wait time in seconds for the BIOS ROM to detect the LAN
media (Internet connection or LAN port). The default is 1.
Backplane Selection
Use this feature to select the backplane device to be used in the system. The options are
Auto and BPN-NVMe3-802N-S4.
Super IO Confi guration
The following Super IO information will display:
•
Super IO Chip AST2500
Serial Port 1 Confi guration
Serial Port 1
Select Enabled to enable the onboard serial port specifi ed by the user. The options are
Enabled and Disabled.
Device Settings
This item displays the base I/O port address and the Interrupt Request address of a serial
port specifi ed by the user.
Note: This item is hidden when Serial Port 1 is set to Disabled.
Change Settings
This feature specifi es the base I/O port address and the Interrupt Request address of Serial
Port 1. Select Auto for the BIOS to automatically assign the base I/O and IRQ address to a
serial port specifi ed.
The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5, 6, 7, 9,
10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12); (IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10,
11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
Serial Port 2 Confi guration
Serial Port 2
Select Enabled to enable the onboard serial port specifi ed by the user. The options are
Enabled and Disabled.
98