Supermicro X11DDW-L User Manual page 110

X11DDW-L/NT User's Manual
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system event log
is full. Select Erase Immediately to erase all events in the log when the system event log is
full. The options are Do Nothing and Erase Immediately.

BMC Network Confi guration
BMC Network Confi guration
Update IPMI LAN Confi guration
Select Yes for the BIOS to implement all IP/MAC address changes at the next system boot.
The default setting is No.
Confi gure IPV4 support
•
IPMI LAN Selection: This feature displays the IPMI LAN setting. The default setting is
Failover.
•
IPMI Network Link Status: This item displays the IPMI Network Link status. The default
setting is Dedicated LAN.
•
Confi guration Address Source: This feature displays the source of the current IPMI LAN
address. The default setting is DHCP (Dynamic Host Confi guration Protocol).
•
Station IP Address: This feature displays the Station IP address for this computer. This
should be in decimal and in dotted quad form (i.e., 192.168.10.253).
•
Subnet Mask: This feature displays the sub-network that this computer belongs to. The
value of each three-digit number separated by dots should not exceed 255.
•
Station MAC Address: This feature displays the Station MAC address for this computer.
Mac addresses are 6 two-digit hexadecimal numbers.
•
Gateway IP Address: This feature displays the Gateway IP address for this computer. This
should be in decimal and in dotted quad form (i.e., 192.168.10.253).
•
VLAN: Select Enabled to enable IPMI VLAN support. The options are Enabled and Dis-
abled. If this option is set to Enabled, the following item will display:
•
VLAN ID
Confi gure IPV6 Support
IPV6 Support
Select Enabled for IPV6 support. The options are Enabled and Disabled. If this item is set
to Enabled, the following item will display:
110