Supermicro X11DDW-L User Manual page 97

boot the computer using a legacy device installed on the PCI-E slot specifi ed by the user. The
options are Disabled, Legacy and EFI. (Note: Riser card names may differ in each system.)
Onboard LAN Device
Select Enable to use onboard LAN devices for internet connections. The options are Disabled
and Enable.
Onboard LAN1 Option ROM
Use this feature to select the type of device to be installed in LAN Port1 used for system
boot. The options are Legacy, EFI, and Disabled.
Onboard LAN2 Option ROM
Use this feature to select the type of device to be installed in LAN Port2 used for system
boot. The options are Legacy, EFI, and Disabled.
Onboard Video Option ROM
Use this feature to select the Onboard Video Option ROM type. The options are Disabled,
Legacy and EFI.
 Network Stack Confi guration
Network Stack
Select Enabled for UEFI (Unifi ed Extensible Firmware Interface) network support. The
options are Enabled and Disabled.
*If "Network Stack" is set to Enabled, the following items will display:
Ipv4 PXE Support
Select Enabled to enable Ipv4 PXE boot support. If this feature is disabled, it will not create
the Ipv4 PXE boot option. The options are Disabled and Enabled.
Ipv4 HTTP Support
Select Enabled to enable Ipv4 HTTP boot support. If this feature is disabled, it will not
create the Ipv4 HTTP boot option. The options are Enabled and Disabled.
Ipv6 PXE Support
Select Enabled to enable Ipv6 PXE boot support. If this feature is disabled, it will not create
the Ipv6 PXE boot option. The options are Disabled and Enabled.
Ipv6 HTTP Support
Select Enabled to enable Ipv6 HTTP boot support. If this feature is disabled, it will not
create the Ipv6 HTTP boot option. The options are Enabled and Disabled.
97
Chapter 4: BIOS