Supermicro X11DDW-L User Manual page 12

X11DDW-L/NT User's Manual
Quick Reference Table
Jumper Description
JBT1 Clear CMOS
JPG1 VGA Enable
JPL1 LAN1/LAN2 Enable
JPME1 ME Recovery
JPME2 Manufacturing (ME) Mode Select
JWD1 Watch Dog Timer Enable
Connector
Battery (BT1)
FAN1~6
IPMI_LAN
JAOM
JD1
JF1
JIPMB1
JL1
JM2_1
JNVI 2 C1/JNVI 2 C2
2
JPI C1
JPWR1/JPWR2
JPWR3
JRK1
JSDCARD1
JSTBY1
JTPM1
JUIDB1
LAN1/LAN2
P1_NVME0/P1_NVME1 (-NT)
P2_NVME0/P2_NVME1 (-NT)
(I-)SATA0~3, 4~7
(S-)SATA0~3
(S-)SATA4/S-SATA5
SXB1
SXB2
Note: To avoid causing interference with other components, please be sure to use an
add-on card that is fully compliant with the PCI-standard on a PCI slot
Description
Onboard CMOS battery
System cooling fan headers
Dedicated IPMI LAN port
PCI-E 3.0 x16 SAS3 AOM controller slot
Power LED/Speaker header (Pins 1-3: Power LED, Pins 4-7: Speaker)
Front control panel header
2
4-pin external BMC I C header (for an IPMI card)
Chassis intrusion header
M.2 slot supported by PCH
2
NVMe SMBus (I C) headers used for PCI-E hot-plug SMBus clock & data connections (an
SMCI-proprietary NVMe add-on card and cable are required; available for a Supermicro
complete system only)
2
Power Supply SMBbus I C header
12V 8-pin power supply connectors
24-pin ATX main power supply connector
RAID Key for onboard SATA devices
Micro SD Card slot
Standby power header
Trusted Platform Module (TPM)/Port 80 connector
Unit Identifi er (UID) switch
Gigabit LAN (GLAN) ethernet ports on the back panel
NVM Express PCI-E 3.0 x4 ports (from CPU1)
NVM Express PCI-E 3.0 x4 ports (from CPU2)
I- SATA 3.0 connectors supported by the Intel PCH
S-SATA 3.0 connectors supported by the Intel SCU
S-SATA connectors with built-in power pins and support of Supermicro SuperDOM (Disk-on
Module) devices
PCI-E 3.0 (x16 + x16) Left Riser Card slot supported by CPU1 and CPU2
PCI-E 3.0 x16 Right Riser Card slot supported by CPU2
12
Default Setting
Open (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Normal)