Supermicro X11DDW-L User Manual page 88

X11DDW-L/NT User's Manual
IOU1 (IIO PCIe Br2)
This feature confi gures the PCI-E Bifuraction setting for a PCI-E port specifi ed by the user.
The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16, and Auto.
IOU2 (IIO PCIe Br3)
This feature confi gures the PCI-E Bifuraction setting for a PCI-E port specifi ed by the user.
The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16, and Auto.
MCP0 (IIO PCIe Br4)
This feature confi gures the PCI-E Bifuraction setting for a PCI-E port specifi ed by the user.
The options are x16 and Auto.
MCP1 (IIO PCIe Br5)
This feature confi gures the PCI-E Bifuraction setting for a PCI-E port specifi ed by the user.
The options are x16 and Auto.

CPU1 PCI-E Br0D00F0 - Port 0/DMI (Available for CPU 1 Confi guration
only)
Link Speed
This feature confi gures the link speed of a PCI-E port specifi ed by the user. The options
are Auto, Gen 1 (Generation 1) (2.5 GT/s), Gen 2 (Generation 2) (5 GT/s), and Gen 3
(Generation 3) (8 GT/s)
The following information will be displayed as well:
•
PCI-E Port Link Status
•
PCI-E Port Link Max
•
PCI-E Port Link Speed
PCI-E Port Clocking (Available for CPU 1 Confi guration only)
Use this feature to confi gure port overclocking settings between the port specifi ed above
and downstream components. The options are Distinct and Common.
PCI-E Port Max (Maximum) Payload Size (Available for CPU 1 Confi guration only)
Select Auto for the system BIOS to automatically set the maximum payload value for a
PCI-E device specifi ed by to user to enhance system performance. The options are Auto,
128B, and 256B.
IOAT Confi guration
Disable TPH (TLP Processing Hint)
TPH is used for data-tagging with a destination ID and a few important attributes. It can
send critical data to a particular cache without writing through to memory. Select No in this
88