Operation
Main Level
Running Mode:
Sys Info
DMX Address:
Temperature:
Configuration (DMX)
The Intimidator Spot 360 works with a DMX controller. Information about DMX is in the CHAUVET DMX
Primer, which is available from the Chauvet website
DMX_Primer_rev05_WO.pdf.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If the starting address is set too high, access to some of the product's channels could be
restricted.
The Intimidator Spot 360 uses up to 14 DMX channels, which defines the highest configurable address to
499.
For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to select Address.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select the starting address, from 001–512.
5. Press <ENTER>.
DMX Personalities
The Intimidator Spot 360 has two DMX personalities, a 12-channel personality, and a 6-channel
personality.
To select a DMX personality, follow the instructions below.
1. Press <MENU>.
2. Use <UP> or <DOWN> to select Run Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select DMX.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select the DMX personality, from 14CH or 08CH.
7. Press <ENTER>.
DMX Channel Assignments and Values
Gobos
Intimidator Spot 360 User Manual Rev. 1
Programming Levels
Ver:
_ _ _ _ _ _ _ Displays the current running mode
_ _ _
_ _ _
Description
V_
Displays the current firmware version
Displays the current DMX address
Displays the product temperature in °C
http://www.chauvetlighting.com/downloads/
Page 7 of 21