Install And Secure The Qxs-412/424 Chassis - Quantum QXS-424 Drive Rackmount Install Manual

Install and Secure the QXS-412/424 Chassis

10. Tighten the screws that you loosely attached in Step 3.
Figure 15: Tightening rail screws
11. Repeat steps 1, 2, and 3 for the other side of the chassis.
Install and Secure the QXS-412/424 Chassis
1. Carefully lift/align the chassis and slide it into the rack. Ensure that the chassis is level.
Caution:
Rails might bend if the chassis is not level when inserted.
l
Replace the rail if it becomes deformed as a result of inserting the chassis in an unlevel position
l
during installation.
QX and QXS 12- and 24-Drive Rackmount Install Guide
Continue to Install the QXS Chassis
* Back to Checklist:QXS Chassis Installation
*Back to Checklist: System Installation
>>
*
*
16