Yaesu FT-1000MP Operating Manual page 83

CAT System Computer Control
Legend:
Send all commands in
order shown! Commands that duplicate a front panel button are named
with all caps or else have their key displayed. Parameter variables are labeled with letters, while "-"
indicates a padding byte. Value is unimportant, but it must be present to pad the block out to five bytes.
Parameter Description
K1=00H (fixed value)
U2= keyer function:
O O H = Message 0 (key #5)
01 H
=
Message 1 (key #6)
02H
=
Message 2 (key #7)
03H = Message 3 (key #8)
04H = CQ/ID Message (key # I )
05H = Contest Number (key #2)
06H = Decrement Contest Number (key #4)
07H = Increment Contest Number (key #3)
08H = Message Playback w/o Tx (key # l o )
091-1 = Write Message into Memory (key #9)
K3=01 H (fixed value)
U4=1 BH (fixed value)
RX EDSP OFF (30H), P I = O O H
AM EDSP Demodulation On (31 H), P1
=
O O H
USB EDSP Demodulation (32H), with audio response of
100 Hz-3.1 kHz (PI =00H) or 300 Hz-2.8
kHz
(PI =1 OH)
LSB EDSP Demodulation (33H), with audio response of
100 Hz-3.9 kHz (PI =00H) or 300 Hz-2.8 kHz (PI =1 OH)
AF Filter Off (.$OH), P I = O O H
AF LPF On (41 H), where P1 = Fcutoff (BCD format)
AF HPF On (42H), where P1
=
Fcutofr (BCD format)
CW 240 HZ BWF (45H), where P1
=
Fcenter (BCD format)
CW 120 HZ BWF (46H), where P I = Fcenter (BCD format)
page
81