Quadivator ST50 Assembly/Operators/Parts Manual page 17

Step 6 – Attach the Outlet Spout Crank to the ATV.
The crank assembly should be mounted with the hardware as far rearward on the
front rack, but not so far as to interfere with the steering mechanism of the ATV.
Clamp it in place, turn the steering from maximum right to left and vice versa and
ensure that there is no interference between the crank and the ATV steering!
Move the crank clockwise and counter-clockwise to ensure that the spout moves
smoothly – adjust if required to ensure smooth movement.
Step 7
– Level the ST50 from side to side with spacers under the scraper blade
and adjust the skid shoes to the same height, start with 10 mm (3/8") and then to
your operating preference.
Attach the Outlet Spout
Crank with the provided
hardware to the rack for a
smooth curve to the ST50.