Service; Introduction; Snow Thrower Terminology - Quadivator ST50 Assembly/Operators/Parts Manual

2. SERVICE

1. When in need of parts or service, give the serial number of the
Quadivator product to your dealer.
2. There is a serial number on the left side of the snow thrower, just to the
left of the collector chute.
3. For your reference, record the serial number of your Quadivator product
at the front of this manual and keep it for reference when contacting
your dealer and/or Quadivator.

3. INTRODUCTION

3.1 SPECIFICATIONS of Quadivator ST50
Quadivator Model
Height Adjustment
Method
Mounting Method
ST50 Width
ST50 Height
ST50 Weight Approx
Impeller Diameter
Impeller Speed
Overall Height
(Controls)
Overall Length –
Snow Thrower
Length - Hitch point
to front of the Snow
Thrower
Length - Hitch point
to the rear of the
Snow Thrower
3.2 Snow Thrower Terminology –
Thrower Parts Manual –
Right & Left Side Height Adjustment with fixed wear
skids on either side of the impeller housing!
inch (mm)
inch (mm)
lbs (kg)
inch (mm)
RPM
inch (mm)
inch (mm)
inch (mm)
inch (mm)
Section 10
- for illustrated part terminology!
ST50
2 point bolted assembly to the Interframe.
50 (1270)
0.5 to 2.5 (13 to 63.5)
440 (200)
14.25 (362)
925
41.0 (1040)
137.8"(3500)
102.8 (2611 +/- 38)
35 +/- 1.5 (890 +/- 38)
see included Quadivator ST50 Snow