Quadivator ST50 Assembly/Operators/Parts Manual page 12

.9 Do not clear snow across the face of slopes. Exercise extreme caution
when changing direction on slopes. Do not attempt to clear steep slopes.
.10 Never operate the snow thrower without proper guards, plates or other
safety protective devices in place.
.11 Never operate the snow thrower near glass enclosures, automobiles,
window wells, drop offs and the like without proper adjustment of the
snow discharge angle. Keep children and pets away!
.12 Do not overload the machine capacity by attempting the clear snow at
too fast a rate.
.13 Never operate the machine at high transport speed and use care when
backing up!
.14 Never discharge at by-standers or allow anyone in front of the unit.
.15 Disengage power to the collector/impeller when the snow thrower is
transported or not in use.
.16 Never operate the snow thrower without good visibility or light!
.4 General Device Operation – Maintenance and Storage
.1 Check shear bolts and all other fasteners at frequent intervals for
tightness to be sure the equipment is in safe operating condition.
.2 Always refer to operator's guide instructions for important details if the
snow thrower is to be stored for an extended period.
.3 Maintain or replace safety and instruction labels, as necessary.
.4 Run the machine a few minutes after throwing snow to prevent freeze-up
of the collector/impeller during the next operation.
.5 Never tamper with safety devices and check their proper operation
regularly.