List Of Functions(Print Cst) - Canon Super G3 Service Manual

5
Service Mode Service Mode > Details of Service Mode > #PRINT > List of Functions(PRINT CST)
● 170: Charging frequency setting
For a user in an environment where image smear is less likely to occur, frequency can be
switched to enable the operation for better image quality.
When "1" is set, it becomes image quality priority mode. However, image smear is likely to
occur.
Default: 0
● 173: Temperature adjustment UP/DOWN mode (2nd page of double-
sided printing)
The temperature adjustment offset relative to the target fixing temperature of the second page
of double-sided printing can be changed in steps of 3˚C. Use this parameter when the fixing
performance is low or when it is necessary to prevent the paper from slipping or being curled.
Plain paper: Plain paper mode, thin paper mode, S thin paper mode, OHP mode
0 - 2: +15˚C
3 - 11: +12 to -15˚C (in steps of 3˚C)
12 - 14: -15˚C
● 174: Reduction in FCOT
Set the pickup permission temperature (temperature adjustment for the fist page of printing)
to -40˚C before fixing.
Use this parameter to reduce the FCOT.
0:OFF
1:ON
● 178: Setting of fixing auto cleaning
You can set whether to execute the fixing auto cleaning.
● 179: Temperature adjustment UP/DOWN mode (Envelop/Postcard)
The temperature adjustment offset relative to the target fixing temperature of the envelope/
postcard can be changed in steps of 3˚C. Use this parameter when the fixing performance is
low or when it is necessary to prevent the paper from slipping or being curled.
Envelop/postcard: Postcard mode, S postcard mode, Envelop mode
0 - 2:+15˚C
3 - 11:+12 to -15˚C (in steps of 3˚C)
12 - 14:-15˚C
5 Service Mode > Details of Service Mode > #PRINT > List of Functions(PRINT CST) Service Mode
● 180: Temperature adjustment UP/DOWN mode (Special mode N)
The temperature adjustment offset relative to the target temperature of fixing in special mode
N can be changed in steps of 3˚C. Use this parameter when the fixing performance is low or
when it is necessary to prevent the paper from slipping or being curled.
0 - 2:+15˚C
3 - 11:12 to -15˚C (in steps of 3˚C)
12 - 14:-15˚C

■ List of Functions(PRINT CST)

● #CST> CAS1> CAS1-U1, #CST> CAS2> CAS1-U1,
#CST> CAS3> CAS1-U1, #CST> CAS4> CAS1-U1
Setting of paper name used for paper size group 'U1'
When setting the following special size paper for U1, U2, U3, and U4 which are specified for
the paper name to be used in paper size group, it becomes possible to treat the paper size in
U1, U2, U3, and U4 as special size paper in universal size cassettes.
Settings 26: OFI, 37: M-OFI, 24: FLSP, 25: A-FLSP, 42: FA4, 34: G-LGL 0: default
● #CST> CAS1> CAS1-U2, #CST> CAS2> CAS1-U2,
#CST> CAS3> CAS1-U2, #CST> CAS4> CAS1-U2
Setting of paper name used for paper size group 'U2'
When setting the following special size paper for U1, U2, U3, and U4 which are specified for
the paper name to be used in paper size group, it becomes possible to treat the paper size in
U1, U2, U3, and U4 as special size paper in universal size cassettes.
Settings 32: G-LTR-R, 23: K-LGL-R, 0: default
● #CST> CAS1> CAS1-U4, #CST> CAS2> CAS1-U4,
#CST> CAS3> CAS1-U4, #CST> CAS4> CAS1-U4
Setting of paper name used for paper size group 'U4'
When setting the following special size paper for U1, U2, U3, and U4 which are specified for
the paper name to be used in paper size group, it becomes possible to treat the paper size in
U1, U2, U3, and U4 as special size paper in universal size cassettes.
Settings 28: B-OFI, 0: default
5-37
5-37