Canon Super G3 Service Manual page 66

5
Service Mode > Details of Service Mode > #LMS > Inactivity of the transmitted license Service Mode
Take utmost precaution when inactivating the license
When invalidating transfer of a license, it is necessary to invalidate the license by entering the
service mode and issue a function invalidation certificate key, which certifies that the license
has been invalidated. This operation can be executed for each optional function. At the point
when a function invalidation certificate key is issued, the function is invalidated and becomes
unavailable. When you report this function invalidation certificate key, the serial number of
the transfer origination device, the serial number of the transfer destination device, and the
reason why you need to perform the transfer to a sales company, a new license key is issued
for installation for the transfer destination device. Be sure to write down the new license key
when you receive it and, when it is registered in the transfer destination device successfully,
inform the user of the new license key and explain him/her to keep it at hand.
Operation Procedure
(1) Enter the service mode and display the following service mode. (Press one key at once to
enter the service mode in the order of "Main, 2, 8, Main".)
When you have entered the service mode, use the left and right arrow keys to display
items,and press the OK key to fix the setting.
(2) Display [#LMS].
(3) Press the OK key and display [#LMS INACTIVE].
(4) Display [ST-SEND].
(5) Press the OK key.
#SEND
001 1
OK
5 Service Mode > Details of Service Mode > #LMS > Inactivity of the transmitted license Service Mode
Press '2' from the numeric
keypad and press 'OK'.
F-5-4
(6) Press 2 using the numeric key and press the OK key.
CAUTION:
The 24 digits of license transfer numbers are displayed, so you take the memo.
Because it cannot maintain the number displaying with the thing of this place limit.
If you do not take the memo, the indication contents are not held when you do OFF of
the main power, it is impossible for license transfer.
Even if you push the reset key and clear the indication, the indication is never display
again.
License transfer example:
0743 5306 1326
8106 5575 0721
(7) Turn OFF/ON the power of the main unit.
For Reference:
When a license option is displayed in Procedure (4), 001 1 is displayed. The last "1" shows
that the license is validated by license authentication.
After the license is transferred, the last number is changed to "2".
When the option is standard, the last number shows "3" which means disable for license
transfer.
Details about the last number:
1: The function is validated.
0: The function is invalidated, or the license is transferred.
(8) When you contact the contact section of the sales company and report a function
invalidation certificate key required for license transfer, the serial number of the transfer
origination device, and the serial number of the transfer destination device, a new license
key that can be registered to the transfer destination device is issued.
(9) Register the new license key to the transfer destination device and make sure that the
function is validated.
OK
F-5-5
5-45
5-45