Print; Numeric Parameter Settings (Numeric Prama) - Canon Super G3 Service Manual

5
Service Mode Service Mode > Details of Service Mode > #PRINT > Numeric Parameter Settings (Numeric Prama)

#PRINT

■ Numeric Parameter Settings (Numeric Prama)

Item No. Default Setting range
#PRINT SW01- SW12
SW SW13 00000001
SW14: 00000100
SW15 00000010
SW16: - 50:
#PRINT 01: - 52:
53: 25 0 to 9999, one
NUMERIC
unit = 0.1 mm
54: 25 0 to 9999, one
unit = 0.1 mm
55: 25 0 to 9999, one
unit = 0.1 mm
56: 25 0 to 9999, one
unit = 0.1 mm
57:
58: 145 0 to 227, one unit
= 0.1 mm
59: 163 0 to 227, one unit
= 0.1 mm
60:
61: 145 0 to 227, one unit
= 0.1 mm
62: 7 0 to 14
63: 7 0 to 14
64: 2 0 to 4
65: 0 0 to 2
66: 0 0 to 3
67:- 133:
134: 212 0 to 255
135: 183 0 to 255
136: 1000 488 to 1511
137:- 139:
144:
145: 1000 488 to 1511
146: 1000 488 to 1511
147: 1000 488 to 1511
148: 1000 488 to 1511
5 Service Mode > Details of Service Mode > #PRINT > Numeric Parameter Settings (Numeric Prama) Service Mode
Function
Not used
Stopping of drive of the Delivery Cooling
FAN
Special mode setting
Interruption of staple job when there is no
staple
Not used
Not used
Adjustment of margin at leading edge of
copy
Adjustment of margin at trailing edge of
copy
Adjustment of margin at right edge of copy
Adjustment of margin at left edge of copy
Not used
Adjustment of the registration loop volume
(Manual tray)
Adjustment of the registration loop volume
(Cassette)
Not used
Adjustment of the registration loop volume
(Duplex unit)
Temperature adjustment UP/DOWN mode
(For normal paper)
Temperature adjustment UP/DOWN mode.
(For thick paper)
Mode for preventing the end temperature
rise
Mode for reducing sand image
Temperature/ Humidity sensor fixed mode
Not used
Laser light intensity adjustment (normal
speed)
Laser light intensity adjustment (low speed)
Adjustment of the point to start writing in
main scanning direction (A)
Not used
Not used
Adjustment of the magnification to write
image in main scanning direction (A-B)
Adjustment of the magnification to write
image in main scanning direction (A-C)
Adjustment of the magnification to write
image in main scanning direction (A-D)
Adjustment of the point to start writing in
main scanning direction (A-B)
Item No. Default Setting range
#PRINT 149: 1000 488 to 1511
NUMERIC
150: 1000 488 to 1511
151: 100 0 to 227
152: 100 0 to 227
153: 100 0 to 227
154: 100 0 to 227, one unit
= 0.1 mm
155: 100 0 to 227, one unit
= 0.1 mm
156: 100 0 to 227, one unit
= 0.1 mm
157: 7 0 to 14
158:-164:
165: 0 0 to 3
166: 7 0 to 14
167: -169:
170: 0 0 to
171: -172:
173: 7 0 to 14
174: 0 0 to 1
175:-177:
178: 1 0 to 1
179: 7 0 to 14
180: 7 0 to 14
5-32
Function
Adjustment of the point to start writing in
main scanning direction (A-C)
Adjustment of the point to start writing in
main scanning direction (A-D)
Developing bias offset for DC
Primary charge offset for DC
Primary charge offset for AC
Adjustment of the registration loop volume
(Thick paper)
Adjustment of the registration loop volume
(Special paper)
Adjustment of the registration loop volume
(Envelop cassette pickup)
Pickup timing adjustment
Not used
Fixing auto cleaning frequency setting
Temperature adjustment UP/DOWN mode
(Plain paper, manual feed tray)
Not used
Charging frequency setting
Not used
Temperature adjustment UP/DOWN mode
(2nd page of double-sided printing)
Reduction in FCOT
Not used
Setting of fixing auto cleaning
Temperature adjustment UP/DOWN mode
(Envelop/Postcard)
Temperature adjustment UP/DOWN mode
(Special mode N)
T-5-36
5-32