Canon Super G3 Service Manual page 87

Installation > Installation Procedure > Installing the Fax Unit
7) Open the Edge Saddle of Cover Support Plate.
8) Remove the Face Plate of Cover Support Plate.
• 2 Screws (Do not reuse the Face Plate and the screws, which were removed.)
Face Plate
x2
9) Secure the Speacker Cable and the FAX Unit Cable with the Edge Saddle of Cover Support
Plate.
Edge Saddle
Speacker Cable
10) Install the Cover Support Plate. (2 Screws)
Installation > Installation Procedure > Installing the Fax Unit
Edge Saddle
F-6-10
FAX Unit Cable
F-6-11
11) Turn over the FAX sheet, and connect the USB Cable
NOTE:
Turn over the FAX sheet only in the case of iR-ADV C9280 PRO/C9270 PRO series
and iR-ADV C7280/C7270/C7260 series.
12) Connect the connector of Speacker Cable on the host machine side and the FAX Unit
side.
• 2 Wire Saddles
x2
Wire Saddle
7
F-6-12
Wire Saddle
Speacker Cable
F-6-13
7