Print The Integrated Inspection Pattern - Canon MX882 Service Manual

- Keep the timing slit strip film (carriage
encoder film) free from stain or damage.
When returning the film, make sure of its
orientation (left and right, front and back).
- See 2-2. Disassembly & Reassembly
Procedures, (7) Carriage unit
details.
Switch (1) Cassette unit
system (2) Left and right side covers
unit (3) Document pressure plate unit
(4) Scanner unit
(5) Main case
(6) Rear cover
(7) Print unit
(8) See 2-2. Disassembly & Reassembly
Procedures.
- See 2-2. Disassembly & Reassembly
Procedures, (9) Purge drive system unit
(right plate) and switch system unit (left
Paper feed
plate) removal, for details.
motor
- See 2-2. Disassembly & Reassembly
Procedures, (10) Engine unit
for details.
- The screws securing the paper feed
motor are allowed to be loosened only for
paper feed motor replacement. (DO NOT
loosen them in any other cases.)
Platen unit (1) Cassette unit
(2) Left and right side covers
(3) Document pressure plate unit
(4) Scanner unit
(5) Main case
(6) Rear cover
(7) Print unit
(8) See 2-2. Disassembly & Reassembly
Procedures, from this step.
Spur unit (1) Cassette unit
(2) Left and right side covers
(3) Document pressure plate unit
(4) Scanner unit
(5) Main case
(6) Rear cover
(7) Print unit
(8) See 2-2. Disassembly & Reassembly
Procedures.
removal, for
1. Adjust the paper feed motor.
[See
Paper feed motor
In the service mode:

2. Print the integrated inspection pattern.

reassembly,
In the service mode:
1. Perform LF / Eject correction (only when
uneven printing or streaks appear on printouts
after replacement).
[See
Mode, for details.]
2. Print the integrated inspection pattern.
In the service mode:
1. Print the integrated inspection pattern.
2. Perform LF / Eject correction (only when
uneven printing or streaks appear on printouts
after replacement).
[See
Mode, for details.]
20 / 76
3-6. Special Notes on Servicing, (2)
adjustment, for details.]
3-3. Adjustment and Settings in Service
3-3. Adjustment and Settings in Service