Status; Device Info - BEC RidgeWave 6900 User Manual

Device Configuration
31

Status

Status
In this section, you can check the router working status, including Device Info, System Status,
System Log, 3G/4G-LTE Status, Statistics, DHCP Table, ARP Table and VRRP Table

Device Info

It contains basic information of the device.
Device Information
Model Name: Name of the router for identification purpose.
Firmware Version: Software version currently loaded in the router
MAC Address: A unique number that identifies the router
Data-Time: Setup correct time on the RidgeWave 6900 with your PC. Check on
Time Zone section
for more configuration information.
System UpTime: Display how long the RidgeWave 6900 has been powered on.
Physical Port Status
Physical Port Status：Display available connection interfaces, WAN (3G/4G-LTE) and LAN, that are
supported in the RidgeWave 6900.
WAN
Interface: List current available WAN connections.
Protocol: Display selected WAN connection protocol
Connection: The current connection status.
IP Address: WAN port IP address.
Default Gateway: The IP address of the default gateway.
LAN
IP Address: LAN port IPv4 address.
RidgeWave 6900 User Manual