Connecting To A Power Source - Samsung Digimax U-CA 401 User Manual

Connecting to a Power Source

There are two ways in which to provide the camera with power. You can use batteries or
alternatively, you can use an AC(100 ~ 250V) Adapter (DC 5V 2.0A).
We recommend using batteries for a digital camera. (Within a year from the date of
manufacture) The batteries are listed below.
Non rechargeable batteries
Rechargeable batteries
The product package may very depending upon which country in which you are located.
Charging the rechargeable battery
[Digimax power pack (SLB-1037)]
Charging the battery
- Insert the rechargeable battery into
the battery slot of the camera(p.16)
- Use the AC adapter included to
connect the power supply of the
camera to a wall power socket.
Following function lamp indicates charging status of the rechargeable battery.
Function lamp display
(Blue LED)
Charging
INFORMATION
If the function lamp display does not work even after inserting the rechargeable battery and
connecting the power supply, please double-check the rechargeable battery polarity. (p. 16)
Please do not connect the AC adapter after inserting a non-rechargeable battery.
When charging the rechargeable battery using the camera, the working temperature is
5 ~ 40 . Please note that when the temperature is outside of the optimal charging
range, the charging process may become slow or stop.
When charging the rechargeable battery using the camera, the following sequential blinks
of the operational function lamp (BLUE) mean unsuccessful charging process.
Please check whether the battery is correctly inserted and the temperature is within the
optimal charging range. If the problem still persists, please visit a nearby service center.
14
: CP-1 battery
: Digimax power pack(SLB-1037)
One LED blinks
0% charged. About 50% charged. About 100% charged.
Two LEDs blink Three LEDs turn on