Starting The Recording Mode - Samsung Digimax U-CA 401 User Manual

LCD monitor indicator
15 Sharpness
16 Image quality
17 Image size
18 Number of available shots remaining
Remaining time (Movie clip/ Voice recording)
19 Digital Zoom rate
20 Digital Zoom
21 Voice memo

Starting the recording mode

If the memory card is inserted in the camera, all the camera functions apply only to the memory card.
If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory.
Recording a Movie clip
1. Insert the batteries (p.16). Insert the batteries taking note
of the polarity (+ / -).
2. Insert the memory card (p.19). As this camera has a 32MB
internal memory, you do not need to insert the memory
card. If the memory card is not inserted, an image will be
stored in the internal memory. To expand memory capacity,
insert a memory card. If the memory card is inserted, an
image will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
5. Select the MOVIE CLIP(
switch.
6. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
7. Press the shutter button to take a movie clip.
Press the shutter button once and movie clips are
recorded for as long as the available recording time
allows. Movie clips will still be recorded if the shutter
button is released. If you wish to stop recording, press
the shutter button again.
Image size and type are listed below.
- Image size
- File type
) mode by sliding the mode
: 640X480, 320X240(Selectable)
: *.avi(MJPEG)
2272, 2048, 1600, 1024, 640
29
00:01:50 / 01:00:00
X4.0
p.39
p.35
p.34
p.21 ~ 22
p.25
p.26
S S T T A A N N D D B B Y Y
[ MOVIE CLIP mode ]
21