Connecting To A Power Source; Using The Batteries - Samsung Digimax A402 User Manual

Connecting to a Power Source

Using the batteries

[ Inserting the AA type battery ]
■ There are 3 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator
Battery status
《14》
Downloaded from www.Manualslib.com
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity (+ / -).
1. Open the battery chamber cover by pushing in the direction of the
arrow.
[ Inserting the CR-V3 type battery ]
3. To close the battery chamber cover, push it until it clicks.
The batteries are fully
charged
manuals search engine
2. Insert the batteries taking note of the
polarity (+ / -).
There is no battery capacity.
Prepare new batteries
Replace with new batteries.