Page 1
Thank you for buying a Samsung Camera. This manual will guide you through using the Digimax U-CA 3, including taking images, downloading images and using the MGI PhotoSuite III SE software. Please read this manual before using your new camera.
Instructions Use this camera in the following order Set up the camera driver Take a picture Insert the USB cable Check the camera’s power Check [Removable Disk] To play back a video shot with this camera, be sure to use the QuickTime player supplied on the software CD-ROM.
Please check that the camera is operating properly prior to when you intend to use it (e.g. for a trip or an important event) to avoid disappointment. Samsung camera takes no responsibility for any loss or damages that may result from camera malfunction.
Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the camera, and then disconnect the power source (batteries or AC Power Adapter). You must contact your dealer or Samsung Camera Service Center. Do not continue to use the camera as this may cause a fire or electric shock.
Increase distance between the camera and the affected device. Use a different socket away from the affected device. Please contact a Samsung agent or a radio/TV engineer. This device complies with part 15 of the FCC Rules. Changes or modifications not expressly approved by the party responsible for compliance...
This digital camera can be used for Printing images using a dedicated printer, DPOF and PictBridge compatible printer or a DPOF-equipped photo lab. (refer to page 55~62) Down loading image files from camera to computer. (refer to page 84) Viewing images on a TV.
Page 9
This digital camera can be used for Creation of a digital photo album. Recording your voice. (refer to page 22) You can even create your own unique gift wrap paper by using your digital images. Taking a self-portrait and using the image to personalize name cards.
Manufacturer's contents Please check that you have the correct contents before using this product. marked contents are optional. Digital Camera Pouch User manual Product warranty Duracell CP-1 battery Digimax Battery Pack : SLB-1037 KIT Battery charger Rechargeable battery AV cable...
Identification of features Front & Top Mode switch Shutter button Flash Function lamp Back & Bottom Viewfinder PLAY mode button monitor * When using the digital zoom to take a picture, the composition of the picture may be different depending on whether you are using the LCD monitor or the viewfinder. The picture will be taken in the composition of the picture as it appears on the LCD monitor.
Battery holder Mode switch You can select the desired working mode by using the mode switch located on the top of the camera. This digital camera has 3 recording modes. These are listed below. Movie clip mode Voice recording mode...
There are two ways in which to provide the camera with power. You can use batteries or alternatively, you can use an AC(100 ~ 250V) Adapter (DC 3.3V 2.0A). We recommend using batteries for a digital camera. (use batteries that are within a year of their date of manufacture) The batteries are listed below.
Connecting to a Power Source INFORMATION Important information about battery usage Do not recharge the non rechargeable batteries. This may cause an explosion. Please remove the batteries if the camera will not be used for long periods. Batteries can lose power over time and are prone to leaking if kept inside the camera. Low temperatures (below 0 ) can affect the performance of the batteries and you may experience reduced battery life.
Connecting to a Power Source : If the camera does not turn on after you have inserted batteries, please Using the batteries 1. Open the battery chamber cover by pushing in the direction of the arrow. Removing the battery There are 3 indicators for battery condition that are displayed on the LCD monitor. Battery indicator The batteries are fully Battery status...
Precautions on Using the Memory Stick Duo This camera operates only with a Memory Stick Duo. Some models of Memory Stick Duo media do not have the write-protect switch (B). Card pins(A) Write protect switch(B) Label(C) Back [ Memory Stick Duo ] Do not insert the Memory Stick Duo on its own into a Memory Stick-compatible device.
Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty. The memory card is an electronic precision device. Do not bend, drop or subject the memory card to any heavy impact.
Inserting the memory card 1. Turn off the camera’s power and pull the memory card cover in the direction of the arrow to open. 2. Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of the camera (LCD monitor), and then push the memory card into the card slot until you hear a click.
When Using the Camera for the First Time If the camera is turned on for the first time, a menu will be displayed to set date, time and language in the LCD monitor. This menu will not be displayed after setting up the date, time and language.
LCD monitor indicator The LCD monitor displays information about the shooting functions and selections. Description Battery Recording mode Camera shake warning Flash Self-timer Voice memo Macro Metering Auto focus frame Time Date Exposure compensation White Balance [ Image & Full Status ] Icons 01:00 PM 2003/01/01...
LCD monitor indicator Sharpness Image quality Image size Number of available shots remaining Remaining time( Movie clip/ Voice recording) Digital Zoom rate Optical zoom Starting the recording mode Recording a Movie clip 1. Insert the batteries (p.15). Insert the batteries taking note of the polarity (+ / -). 2.
Starting recording mode Recording Voice Steps from 1-4 are the same as those for recording a movie clip. 5. Select the VOICE RECORDING( the mode switch. 6. Press the shutter button to record a voice. - Press the shutter button once and voice is recorded for as long as the available recording time(Max : 1 hour) allows.
Things to watch out for when taking pictures INFORMATION If the camera is in focus, when you press the SHUTTER button halfway, the camera status lamp (green) will light up and the LCD monitor's autofocus mark will turn green. If the camera is out of focus, when you press the SHUTTER button halfway, the camera status lamp (green) will blink and the LCD monitor's autofocus mark will turn red.
Using the camera buttons to adjust the camera The RECORDING(STILL IMAGE, VOICE RECORDING, MOVIE CLIP) mode function can be set up by using the camera buttons. POWER button Used for turning the camera’s power on / off. If there is no operation during the specified time, the camera’s power will be turned off automatically to save battery life.
Page 25
WIDE / TELE button TELE Zoom Optical zoom TELE : Pressing the zoom button T. This will zoom into the subject i.e. the subject will appear nearer. Digital zoom TELE : When the maximum (3X) optical zoom is selected, pressing the zoom button T activates the digital zoom software.
WIDE / TELE button INFORMATION To use the digital zoom the LCD monitor has to be turned on. Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. The digital zoom cannot be used in movie clip shots.
Voice memo( 3. Press the shutter button and take a picture. The picture is stored on the memory card. 4. Voice memo will be recorded for ten seconds from the moment the picture is stored. In the middle of the sound recording, pressing the shutter button will stop the voice memo. INFORMATION A distance of 40cm between you and the camera (microphone) is the best distance to record sound.
Focus lock To focus on the subject positioned outside of the center, use the focus lock function. Using the Focus Lock 1. Ensure the subject in the center of the autofocus frame. 2. Press the SHUTTER button halfway. The camera status lamp (green) will light up, indicating that the camera is in focus.
Page 29
FLASH( ) / LEFT button Flash mode indicator ICON Flash mode If the subject or background is dark, the camera flash will operate Auto flash automatically. If a subject or background is dark, the camera flash will work Red eye automatically and will reduce the red-eye effect by using the red- reduction eye reduction function.
Self-timer( When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the sub tab. When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self- timer( ) button.
MENU/ OK button If the menu is displayed, use the 5-Function buttons ( / / / ) to change the data values and for your changes to be accepted. If the menu is not displayed, press the MENU/OK button to display a menu for the current camera mode on the LCD monitor.
Page 32
+/- button 2. Use the LEFT and RIGHT buttons to set the desired exposure compensation factor ( Ev). 3. Press the +/- button again. The value you set will be saved and the Exposure Compensation setup mode will close. If you change the exposure value, the exposure indicator ( ) will be displayed on the bottom of the LCD monitor.
Page 33
+/- button Using the Custom White Balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. 1. Select the CUSTOM ( 2.
Page 34
+/- button Userset mode : This camera automatically adjusts the shutter speed and aperture values to the shooting environment. However, in Night Shot mode, you can set the shutter speed and aperture values to your preference. Select Night Shot mode, and then press the +/- button. The zoom function does not work while setting up the aperture value and shutter speed.
+/- button Aperture values that can be selected for each zoom position are as follows: Zoom Position zoom0 zoom1 zoom2 zoom3 zoom4 zoom5 zoom6 zoom7 Focusing range(mm) Large Aperture Value Small Large (Press the UP button.) Aperture Value Small (Press the DOWN button.) LCD button You can check the recording status in the LCD monitor.
Using the LCD monitor to adjust the camera settings You can use the menu on the LCD monitor to set up recording functions. In the STILL IMAGE/ MOVIE CLIP mode, pressing the MENU button displays the menu on the LCD monitor. INFORMATION The menu will not be displayed on the LCD monitor in the following circumstances: - When another button is being operated.
Using the LCD monitor to adjust the camera settings Menu tab Main menu EFFECT SHARP How to use the menu 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. However, there is no menu for Voice Recording mode. ( 2.
Mode You can select the desired Still Image mode. This is available in Auto, Manual, and Night modes. AUTO : Use this for shooting basic still images. MANUAL : Use this to store your custom settings for the camera. Any changes made to settings other than Self-Timer and Voice Recording will be saved.
FINE NORMAL [ STILL IMAGE mode ] Image Size and Quality for the Number of Images that can be saved in a Memory Card/Shooting Time(When using a 32MB Memory Stick Duo; based on Samsung's own testing) Mode Quality/Size 2048 S.FINE...
Metering If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. This can be set in Auto and Manual modes. MULTI( : Exposure will be calculated based on an average of the available light in the image area.
Effect Setting RGB Values 1. Use the DOWN button to select [RGB] among the Effect submenus, and then press the OK button. A screen that looks like the one shown on the right will appear. 2. Use the UP and DOWN buttons to select the [OFF] or [ON] auxiliary menu, and then press the OK button.
Starting play mode Turn the camera on and select Play mode by pressing the play mode button ( The camera can now play back the images stored in the memory. If you have turned on the camera by pressing the POWER button, you can press the PLAY button once to switch to Play mode and press it again to switch to Recording mode.
Starting play mode Playing back a movie clip Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded movie clip that you want to play back by using the LEFT/RIGHT button. If you select a movie clip, the movie clip indicator ( LCD monitor.
LCD monitor indicator The LCD monitor displays information about the shooting conditions. Description Battery Play mode File Type Voice memo Protect indicator DPOF indicator Stored image number If you press the LCD button, you can check the following recording information: SIZE : 2048X1536 AV : F2.8 TV : 1/60...
Using the camera buttons to adjust the camera In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Thumbnail( ) / Enlargement( You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image.
Thumbnail( The maximum enlargement rate in proportion to the image size. Image size Maximum enlargement rate Trimming : You can extract part of the image that you want and save it separately. 1. Select an image that you want to enlarge and press the enlargement button.
Voice( ) memo / Up button 3. Press the shutter button to start recording. The [REC] message will be displayed on the LCD monitor (as shown) and voice will be recorded to the still image for 10 seconds. 4. The recording can be stopped by pressing the shutter button again.
LEFT / RIGHT/ MENU/ OK button LEFT / RIGHT/ MENU/ OK buttons activate the following. - LEFT button : While the menu is showing, press the LEFT button to select the menu tab to the left of the cursor. - RIGHT button : While the menu is showing, press the RIGHT button to select the menu tab to the right of the cursor, or to move an auxiliary menu.
Delete( ) button This deletes images stored on the memory card. Deleting Images in Play Mode 1. Select an image that you want to delete by pressing the LEFT / RIGHT button and press the DELETE( 2. A message will display as shown alongside on the LCD monitor.
Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows.
Page 51
Setting up the play back function using the LCD monitor Menu tab Main menu IMAGES SETUP RESET Menus are subject to change without prior notice. Sub menu ONE PIC ALL PICS DEFAULT SIZE LAYOUT PAPER QUALITY DATE FILENAME PRINT DPOF PRN Secondary menu Page p.
Deleting all images Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. (The files that were stored in the AVATAR folder will not be deleted.) Deleting all images 1. Press the play mode button and press the menu button. 2.
Protecting images 4. Select the desired secondary menu by pressing the UP/DOWN button and press the OK button. [UNLOCK] : Cancels the protect function. [LOCK] : Sets up the protect function. - If you select the[ONE PIC] sub menu at step 3, you can protect or unprotect another image by pressing the LEFT/ RIGHT button.
Resize A stored image size can be changed and used as a logo image. The resized image will have a new file name. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [RESIZE] menu tab.
Rotating an image You can rotate the stored images by 90, 180, or 270 degrees. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [ROTATE] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button.
DPOF : STANDARD This function allows you to embed print quantity information on a stored image. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. 3. Select the [STANDARD] menu by pressing the UP/ DOWN button and press the RIGHT button.
DPOF : PRINT SIZE You can specify the print size when printing images stored on the memory card. The print size you set will be applied to all pictures stored on the memory card. Setting the Print Size 1. Press the play mode button and press the menu button. 2.
PictBridge You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. You can set up the following settings from the PictBridge menu. IMAGES PRINTER SETUP PRINT...
PictBridge: Picture Selection You can select the scope of the PictBridge function. 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.58) 2. The [PICTBRIDGE] menu will appear. 3.
PictBridge: Print Setting You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.58) 2.
PictBridge: Picture Printing Printing Pictures 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.58) 2. The [PICTBRIDGE] menu will appear. 3. Use the UP and DOWN buttons to select the [PRINT] menu, and then press the OK button.
PictBridge : DPOF AUTO PRINT This allows you to directly print the files with DPOF information. For instructions on how to set up DPOF, refer to pages 55 to 57. 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.58) 2.
Setup menu In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. The changed setup mode values will be maintained even if you turn the camera off and then back on. The items indicated by Menu tab Main menu...
Setup menu Menu tab Main menu SOUND VIDEO Q.VIEW RESET File name This function allows the user to select the file naming format. Assigning File Names 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab.
File name INFORMATION The first stored folder name is 100SSCAM, and the first file name is SUC30001. Whenever you store an image, the file number is increased by 1. The file numbers are named from SUC30001 to SUC39999 automatically, 9999 files will be stored in a folder.
Language There is a choice of languages that can be displayed on the LCD monitor. Even if the batteries or AC adapter are removed and inserted again, the language setting will be preserved. Setting Language 1. In any mode other than Voice Recording mode, press the MENU button.
Setting up the Date/ Time/ Date type You can change the date and time that will be displayed on the captured images and set up the date type. Setting Date/Time & Selecting Date type 1. In any mode other than Voice Recording mode, press the MENU button.
Imprinting the recording date INFORMATION The Date & Time are imprinted at the bottom right side of the still image. The date will be imprinted as a DATE TYPE setting. TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the 12 hour clock.
Sound If you set the operation sound to ON, various sounds will be activated for camera startup, when button are pressed, and if there is a card error, so that you can be aware of the camera operation status. Setting Operation Sounds 1.
Selecting Video out type The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. Setting the Video Out Type 1.
Quick view If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is possible only with still images. Setting Quick View 1.
Connecting an External Device (USB) You can select an external device to which you want to connect the camera using the USB cable. Selecting an External Device 1. In any mode other than Voice Recording mode, press the MENU button. 2.
Setting up the MYCAM menu You can set up a start up image, start up sound, shutter sound and AVATAR. Every camera working mode (with the exception of Voice recording mode) has the MyCAM menu. Menu tab Main menu AVATAR S.IMAGE S.SOUND SH.SOUND...
Page 74
Avatar Storing Avatars for the Startup Image and Selecting One as the Startup Image 1. In a mode other than Voice Recording mode, press the MENU button. 2. Use the LEFT and RIGHT buttons to select the [MYCAM] menu tab. 3.
Avatar Playing Back an Avatar 1. Press the PLAY ( ) button to select Play mode. 2. The last image taken will be displayed on the LCD monitor. 3. Use the LEFT and RIGHT buttons to select an avatar file for playback.
Start up image INFORMATION Only an image that is saved as a LOGO in the [RESIZE] sub menu can be used as the start up image. The logo image will not be deleted by the [DEL.ALL] or [FORMAT] menu. Start up sound You can select the sound that is activated whenever the camera is turned on.
List of camera functions : Default : There is no related menu. : Altered settings and values are maintained even after the camera is turned off. (KEEP) : A default value is restored when the camera is turned off. (RETURN) : A default value is restored after the function has been executed.
Page 78
List of camera functions Camera working mode Function Auto Daylight Cloudy White Fluorescent balance Tungsten User set NORMAL B & W EFFECT SUNSET SEPIA SOFT NORMAL Sharpness VIVID Auto Red eye (with Auto) Fill-in Flash Slow sync. (with Red eye) -0.5 ~-2.0EV (1/2 steps) Exposure...
Page 79
List of camera functions Camera working mode Function Self-timer 2sec 10sec Voice Do not record recording Record Voice Do not record memo Record 80 cm ~ infinity Auto focus 5 ~ 80cm 1~10 Slide show (1sec step) No repeat Repeat UNLOCK PROTECT LOCK...
Page 80
List of camera functions Camera working mode Function ONE PIC IMAGES ALL PICS DEFAULT CUSTOM POSTCARD 8X10 FULL INDEX PLAIN PAPER PHOTO FAST PHOTO DRAFT QUALI T Y NORMAL FINE DATE FI L ENAME PRINT DPOF PRN RESET Movie Recording clip Auto Night Manual...
Page 81
List of camera functions Camera working mode Function Trimming 1600X1200 1024X768 RESIZE 640X480 LOGO ROTATE Deletion DEL.ALL RESET FILE SERIES CANCEL 1, 2 MIN 3 MIN 4~10 MIN LANGUAGE 16 languages FORMAT 2003/01/01 DATE ~ 2050/12/31 12:00 A.M TIME ~11:59 P.M DATE IMPRINT D &...
Page 82
List of camera functions Camera working mode Function Y/M/D M/D/Y Date type D/M/Y SOUND MEDIUM HIGH DARK NORMAL BRIGHT NTSC VIDEO 1 sec. Q.VIEW 2~5 sec. DEL.ANS. COMPUTER PRINTER RESET AVATAR CHANGE IMAGE1 S.IMAGE OFF, IMAGE 2, 3 SOUND 1 S.SOUND OFF, SOUND 2, 3 SOUND 1...
Starting PC mode If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". In this mode, you can download stored images to your PC through the USB cable. The LCD monitor is always turned off in PC mode.
Page 84
Starting PC mode Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use photo editing software to edit them. 1. Use the supplied USB cable to connect the camera to your computer and then turn on the camera.
Starting PC mode 7. An image file is transferred from the camera to your PC. - By using [Digimax Viewer], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files. (p.112) Important notes Be sure to observe the following precautions! This unit contains precision electronic components.
- Pay attention not to get fingerprints or foreign substances on the surface of the lens. If the digital camera is not used for a long period, an electric discharge can occur. It is a good idea to remove the batteries and the memory card if you do not intend using the camera for an extended period of time.
Warning indicator There are several warnings that may appear on the LCD display Warning indicator - Memory card error CARD ERROR ! - There is insufficient memory capacity to take CARD FULL ! an image - There are no images stored on the memory card NO IMAGE ! - A memory card is not...
Before contacting a service center Please check the following Symptom - There is low battery capacity - An AC Power Adapter is not connected The camera doesn t - Batteries are inserted switch on incorrectly with the reverse polarities. - The batteries are exhausted - The Camera is turned off The camera power automatically.
Page 89
Before contacting a service center Symptom - A picture was taken within 0.8 m from the subject without setting an appropriate macro mode. The images are - Taking a picture beyond unclear the flash range - The lens is smudged or dirty.
Page 90
Before contacting a service center Symptom Colour of image is - White balance setting is different to the incorrect. original scene Images are too - Exposure is excessive. bright - The external monitor has not been connected No image on properly with the camera.
Specifications Type Image Effective Pixel Sensor Total Pixel Focal Length Lens F No. Digital Zoom Optical Viewfinder Viewfinder LCD Monitor Type Focusing Range Type Shutter Speed Control Compensation Exposure ISO Equivalent Manual Modes Flash Range Recharging Time Sharpness Effect White Balance Voice Recording Date Imprinting Still Image...
1024 : Super fine 66, Fine 132, Normal 198 640 : Super fine 169, Fine 336, Normal 501 * These figures are measured under Samsung’s standard conditions and may vary depending on shooting conditions and camera settings. Single Image, Thumbnails, Slide Show, Movie Clip Trimming, Rotating, Resizing Digital output connector : USB 1.1...
We cannot, however, be held responsible in any way for damage caused by inappropriate use. Using a Hand-made PC or a OS(Operating System) that has not been guaranteed by the manufacturer is not covered by the Samsung warranty. Before reading this manual, you should have a basic knowledge of computers and O/S (Operating Systems).
Page 94
Be sure to check the system requirements before installing the driver. You should allow 5~10 seconds for running the automatic setup program according to the capability of the computer. If the frame does not show, run the [Windows Explorer] and select [samsung.exe] in the CD-ROM Drive root directory. DigiStudio 128MB...
INFORMATION Close other programs before installing the application software. Before installing the application software, disconnect the USB connection. You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://www.samsungcamera.co.kr : Korean 1. Click the [Install] menu in the Autorun frame.
Page 96
Setting up the application software 5. The Software License Agreement window will open, asking you to agree to the licensing. Use the button on the bottom left to select the language of your choice, and then click [Agree] to accept the license agreement. The installation will proceed to the next stage.
Page 97
Setting up the application software The QuickTime program folder will appear. Click on the Close button to close the folder. 11. Set the transfer rate for downloading content from the Internet, and then click [Next >]. 13. Specify the file types you want to associate with QuickTime.
Page 98
Setting up the application software * The QuickTime Player will launch, the readme file will open, and the Step 15 window will open. Click on the Close 1 and Close 2 buttons to exit the program. 15. A window where you can choose the program you want to install will appear.
Page 99
Setting up the application software 18. A destination selection window will open. Click [Next >]. To copy to the files to another folder, click [Browse (R)..] and choose a folder you want. 19. A window will open, asking you to choose a folder to which program icons will be added.
Page 100
Setting up the application software 23. The Software License Agreement window will be displayed. If you agree to this, click [Yes], the window will then move to the next step. If you disagree, click [No] and the installation program will be canceled. 24.
Page 101
Setting up the application software * The MGI III file will open. Click on the Close button to close the window. 29. The Installation Wizard is finished now. Choose [Yes, I want to restart my computer now], and then click [Finish] to restart your PC.
Page 102
2. Refer to FAQ (p.123) to check for a possible solution to the problem. 3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host Controller), download the patch file from the Samsung Camera web page. (http://www.samsungcamera.com)
DigiStudio Installation guide System Requirements for DigiStudio DigiStudio requires the following minimum system configuration for smooth 3D performance. If your system does not meet the requirements, you will receive error messages and the installation will not continue. Recommended System Requirements Pentium III 500Mhz Graphic Card Graphic card with 3D acceleration and at...
Page 104
DigiStudio Installation guide Cautions on the Graphic Card (VGA) The DigiStudio software will not install on a PO with a graphic card that does not support 3D acceleration and that has less than 8 MB video RAM. If the graphic card error screen appears while using DigiStudio, please go through the following steps: Step 1 : Go to My Computer...
DigiStudio Installation DigiStudio is a 3D avatar creation program. You can store 3D avatar files on the camera and use one of the avatars as the startup image. Be sure to check the system requirements (p. 103) before installing the program. This software is available in the Windows version only.
Page 106
DigiStudio Installation 6. The Software License Agreement window will appear, asking you to agree to the licensing. Use the button on the bottom left to select the language of your choice, and then click [Agree] to accept the license agreement. The installation will proceed to the next stage.
Page 107
DigiStudio Installation 13. The [Connection Speed] window will open. Click [Next]. To choose another transfer rate, click and select the desired transfer rate. 14. The Browser Plug-in window will open. Click [Next]. 15. The File Type Association window will open. Click [Finish]. If you want to associate other file formats with QuickTime, put a checkmark (V) besides the file formats you want.
Removing the USB Driver for Windows 98SE To remove the USB driver, refer to the process shown below. 1. Trace [Start Settings] and click [Control Panel]. 2. Double-click [Add/Remove programs]. 3. The [Add/Remove Programs Properties] window will open. Click [Digimax U-CA3 Camera] and click the [Add/Remove] button.
Removable Disk To use this camera as a Removable Disk, install (p.95) the USB Driver. 1. Before turning the camera power on, connect the camera to the PC with the USB cable. 2. Click [Removable Disk] under [My computer] or [Windows Explorer]. 3.
Select the [USB Mass Storage Device] and click the [Stop] button. 4. The [Stop a Hardware device] window will open. Select the [SAMSUNG DIGIMAX UCA3 USB Device] and click the [OK] button. 5. A [Safe to Remove Hardware] window will open.
Removing the removable disk 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. 7. Unplug the USB cable. Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver.
Refer to the [Help] menu in Digimax viewer 2.1 for further information. 1. To open Digimax Viewer, click the [Start Samsung Digimax Viewer 2.1 and Digimax Viewer 2.1 will then open. 3. You can easily use the Digimax viewer 2.1 program as it offers a FILE menu and TOOL bar.And, you can use the...
MGI PhotoSuite III SE This software is only compatible with Windows. To open MGI PhotoSuite lll SE, click the [Start PhotoSuite lll SE] and MGI PhotoSuite lll SE will then open. An introduction to the Welcome screen Programs Get images. Prepare A number of photo editing activities can be performed within this module.
Page 114
MGI PhotoSuite III SE Introduction to navigation bar Back Return to the previous step. Home Return to Welcome screen. Help Display help window. Get images. Prepare A number of photo editing activities can be performed within this module. Compose Use your photos in a variety of fun and interesting ways. Organize Organize your photos and other media files into albums.
Page 115
3. The Welcome screen will change to the next work step, with the selected image displayed. When you obtain images from the digital camera. Before transferring an image file, check the USB connection. 1. To acquire images, click the large [Get] button on the Welcome screen, or the [Get] button on the Navigation bar.
Page 116
[Album] from the list of options displayed are available. You will be able to obtain images from the digital camera. Acquiring images from an Album. 1. To acquire images, click the large [Get] button on the Welcome screen, or the [Get] button on the Navigation bar.
Page 117
MGI PhotoSuite III SE 2. After selecting Album on the [ Choose a photo album], click an image in the album and click [Open]. 3. The Welcome screen will change to the next work step, with the selected image displayed. Refer to page 120 for more information about creating an Album.
Page 118
MGI PhotoSuite III SE Compose Add text, Compound Images etc. are available in this step. Menu of [COMPOSE] steps Collages : A collage consists of several photos or sections of photos arranged together on a common background. Photo Layouts : The Photo Layouts activity includes many collage and layout options.
Page 119
MGI PhotoSuite III SE Organize Organize your photos and other media files into albums. Menu of [ORGANIZE] steps Choose a photo album to view or edit] Select Album : To create an Album, click [Organize] in the welcome screen or navigation bar. Album..
Page 120
MGI PhotoSuite III SE Creating an Album 1. To create an Album, click the large Organize button on the Welcome screen, or the Organize button on the Navigation bar. 2. Click [Album..] in [ Choose a photo album to view or edit.] 3.
Page 121
Add..] to add images to the album. 2. Click [Computer] in Add Photos menu. [Digital Camera(Direct)], [Scanner(TWAIN)], [Digital Camera(TWAIN)] sources can't be used. 3. A [Add photo to Album] window will open. Select images that you want to add.
Page 122
MGI PhotoSuite III SE Share Saving or sharing images. Menu of [SHARE] steps Save To save the active file according to its current name and path. Save As To assign a new name or path to the file. Send E-mail e-mailing images.
Please check the following if the USB connection malfunctions. [Case 1] The camera power is off. Turn the camera power on. We recommend using an AC power adapter in PC mode. [Case 2] USB Driver is not installed correctly. Install the USB Driver correctly. Refer to page 95. [Case 3] The USB cable is not connected or you are using a cable with an incorrect specification.
Page 124
Win XP There must be USB Host Controller and USB root hub under [Universal serial bus controller]. When all the conditions mentioned above are met, the computer can support the USB interface. [Case 7] When using the USB hub. There may be a problem in connecting the camera to the PC through the USB hub if the PC and the hub are not compatible.