Self-Timer / Right Button; Self-Timer - Samsung Digimax U-CA 401 User Manual

Self-timer(

When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor
shift to the sub tab.
When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-
timer( ) button. This function is used when the photographer would also like to be in the
image.
Selecting the self-timer
1. Slide the mode switch to the STILL IMAGE mode.
2. Press the SELF-TIMER button until the desired mode
indicator displays on the LCD monitor.
A 10 second, 2 second or Double self-timer icon
appears on the LCD monitor.
10SEC self-timer (
Pressing the shutter button will allow an interval of 10
seconds before the image is taken.
2SEC self-timer (
Pressing the shutter button will allow an interval of 2
seconds before the image is taken.
Double self-timer (
A picture will be taken after about 10 seconds and 2
seconds later a second picture will be taken. When using
the flash, the 2-second self-timer may be delayed for longer
than 2 seconds depending on the flash charge time.
3. When you press the SHUTTER button, the picture will be taken after the specified time
has elapsed.
INFORMATION
The default is OFF.
When taking a picture using the self-timer, the function lamp works as follows:
10 second self-timer setting : The function lamp blinks at 1 second interval for the first 7
2 second self-timer setting
If you operate the Power button, Mode switch, and Self-timer button during the self-timer
operation, the self-timer function is cancelled.
The only self-timer option available during the recording of a movie clip is the 10 second option.
When in the voice recording mode and TEXT mode, the self-timer function does not work.
) / Right( ) button
) :
) :
) :
seconds. It blinks at 0.25 second interval for the remaining
3 seconds.
: The function lamp blinks at 0.25 second interval for 2
seconds.
[ Selecting the 10SEC self-timer ]
29