Using The Batteries; Removing The Battery - Samsung Digimax U-CA 401 User Manual

Connecting to a Power Source

Using the batteries

1. Open the battery chamber
cover by pushing in the
direction of the arrow.

Removing the battery

There are 3 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator
Battery status
16
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the
polarity(+and-)
2. Insert the batteries
according to the polarity
marks (+ and -) on the
back of the battery
chamber cover.
1. Turn off the camera power. Open the battery chamber
cover and unlock the battery by pushing the battery lock
lever. The battery will pop up slightly.
2. Remove the battery in the direction indicated and close the
battery chamber cover.
The batteries are fully
charged.
3. To close the battery
Prepare new batteries.
chamber cover, push it
until it clicks.
There is no battery capacity.
Replace with new batteries.