File Name - Samsung Digimax U-CA 401 User Manual

Setup menu
Menu tab Main menu

File name

This function allows the user to select the file naming format.
Assigning File Names
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [FILE] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[RESET] : After using the reset function, the next file name
will be set from 0001 even after formatting, deleting all or inserting a new
memory card.
[SERIES] : Under this system, the file name will directly follow the last stored file name,
regardless of any actions such as file deletion or formatting.
5. Press the menu button twice and the menu will disappear.
INFORMATION
The first stored folder name is 100SSCAM, and the first file name is SCD40001.
File names are assigned sequentially from SCD40001
The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM
101SSCAM ~
The files used with the memory card conform to the DCF(Design rule for Camera File
systems) format.
56
Sub menu
LAMP
VIDEO
Q.VIEW
OFF, 1 ~ 3 SEC
999SSCAM.
Secondary menu
ON
OFF
NTSC
PAL
SCD40002
Page
p.61
p.62
p.63
AUTO
SET UP
FILE RESET
PWR OFF SERIES
LANGUAGE
BACK: SET:OK
~ SCD49999.