Fixed Focus; Flash / Left Button - Samsung Digimax U-CA 401 User Manual

Fixed focus

To focus on the subject positioned outside of the center, use the focus lock function.
Using the Focus Lock
1. Ensure the subject in the center of the autofocus frame.
2. Press the SHUTTER button halfway. When the autofocus lamp (green) lights up, it means
the camera is focused on the subject. Be careful not to press the SHUTTER button all the
way down to avoid taking an unwanted pictured.
3. With the SHUTTER button still pressed down only halfway, move the camera to
recompose your picture as desired, and then press the SHUTTER button completely to
take the picture. If you release your finger from the SHUTTER button, the focus lock
function will be canceled.
[ The image to be captured ]
FLASH( ) / LEFT button
When the menu is displayed on the LCD monitor, pressing
the LEFT( ) button makes the cursor shift to the left tab.
When the menu is not displayed on the LCD monitor, the
LEFT( ) button operates as the FLASH (
Selecting the flash mode
1. Slide the mode switch to the STILL IMAGE mode.
2. Press the Flash(
indicator displays on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD
monitor.
Use the correct flash to suit the environment.
Flash range(AUTO) : 0.2 ~ 2m
[ Press the SHUTTER button
halfway and focus on the subject ]
) button until the desired flash mode
) button.
[ Selecting the Auto flash ]
[ Recompose the picture and fully
depress the SHUTTER button ]
27