Ml610Q100 Or Ml620Q000 Is Connected As Target Lsi; Recommended Circuitry Using Reset_N Pin And Test Pin - LAPIS Semiconductor EASE1000 User Manual

2.5.1.2 ML610Q100 or ML620Q000 is connected as target LSI

2.5.1.2.1 Recommended circuitry using RESET_N pin and TEST pin

The example of a circuit connected with EASE1000 using RESET_N pin and TEST pin is shown below.
- Do not connect the parts which RESET_N pin is fixed to a High level.
The pull-up resistance is connectable with RESET_N pin.
- Do not connect any parts to TEST pin.
RST_OUT/SCK
Figure 2-5
FEXTEASE1000-02
EASE1000
Interface connector
1
VTref
5
7
SDATA
13
3.3VOUT
9
VDDL
2,4,6,8,10,12
Vss
3,11,14
NC
Recommended circuitry using RESET_N pin and TEST pin
EASE1000 User's Manual
General Description
Chapter 2
Target LSI
V
DD
RESET_N
TEST
VDDL
Vss
7