Chapter 5. Programming
4) Program
Specifying mounted Base No.
Specifying mounted Slot No.
Specifying used channel
Specifying Thermocouple type (type K)
Used Channel No.
Indicating the error status during
initialization function block execution
Indicating run channel during
initialization function block execution
Channel 1 Reading complete.
Indicating the error status during
Base No.
reading function block execution
Turns On if error occurs
Slot No.
at the Ch 1
Indicating the temperature conversion value
Digital conversion value of Ch1
Channel 0 Reading complete.
Indicating the error status during
Base
reading function block execution
No.
Slot
Turns On if error occurs at the Ch 0
No
Used
Indicating the temperature conversion value
Channel
No.
Digital conversion value of Ch 0
of Ch1 (-2000~12000)
5 - 7
Thermocouple input module
initialization has been finished.
of Ch 0 (-2000~12000)
If the temperature detected at the
Ch 0 is less than –20 or larger
than –30%, Q0.1.0 turns on.
If the temperature detected at the
Ch 1 is less than –20 or larger
than –30%, Q0.1.0 turns on.
If the difference
between
two
temperatures of
Ch 0 and 1 is
lager than 5,
Q0.1.2
turns
on.