LG G3F-TC4A User Manual page 47

Chapter 7. DEDICATED INSTRUCTIONS FOR SPECIAL MODULES
Write to Buffer Memory ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ PUT, PUTP
7.1.2
<Format>
Format
n1 The slot No. where the specific modules mounted
Head address of the specific module buffer memory to which the
n2
data will be written..
Head address of the device where the data to be written has been
S
stored, or an integer
n3 Word number of data to be written.
PUT: always executed if the execution condition turns On. (
PUTTP : executed if the execution condition is triggered. (
Example 1) In this example, , the thermocouple input module is mounted on the slot 6 in the unit and the data of
CPU module addresses D50 and D51 will be written to the buffer memory addresses 3 and 4.
(address)
D48
D49
D50
D51
D52
<PUT>
Execution condition
Execution condition
<PUTP>
Execution condition
for PUT
Description
<The difference between PUT and PUTP>
CPU module D area
Data 1
Data 2
PUT 00006 00003 D0050 00002
for PUT
for PUTP
M0000
PUTP 00006 00003 D0050 00002
PUT n1 n2 S n3
Thermocouple
input module buffer memory
Specifying type of thermocouple
Specifying type of thermocouple
D M0000
7 - 2
Available Data Type
Integer
Integer
M,P,K,L,T,C,D,#D
Integer
)
)
(address)
1
2
3
4
5