LG G3F-TC4A User Manual page 3

Glofa, master-k programmable logic controller
Table of Contents

Advertisement

SAFETY PRECAUTIONS
Be sure to read carefully the safety precautions given in data sheet and user's manual before operating the module
and follow them.
The precautions explained here only apply to the G3F-TC4A , G4F-TC2A andG6F-TC2A.
For safety precautions on the PLC system, see the GLOFA GM3/4 User's Manuals, GLOFA GM6 User's Manuals
or the MASTER-K 1000S/300S/200S User's Manuals.
A precaution is given with a hazard alert triangular symbol to call your attention, and precautions are represented
as follows according to the degree of hazard.
!
WARNING
!
CAUTION
However, a precaution followed with
Both of two symbols indicate that an important content is mentioned, therefore, be sure to observe it.
Keep this manual handy for your quick reference in necessary.
Design Precautions
▶ Do not run I/O signal lines and compensating wires near to high voltage line or
power line.
Separate them as 100 mm or more as possible.
Otherwise, noise can cause module malfunction.
If not provided with proper prevention, it can cause death or fatal
injury or considerable loss of property.
If not properly observed, it can cause a hazard situation to result
in severe or slight injury or a loss of property.
!
CAUTION
can also result in serious conditions.
!
CAUTION

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G4f-tc2aG6f-tc2a

Table of Contents