LG G3F-TC4A User Manual page 37

Chapter 5. Programming
4) Program
Requests the execution of initialization function block so that the initialization
can be executed one time when the opposite station is normally operating.
Program for re-start after a power failure
has occurred during communications.
Reading Function block execution
request at every scan.
MUL
5 - 10
The opposite station
power failure information
If the power is restored
from fault or power-off,
then it turns 'on'.
On remains until a user
program turns it off.
If the temperature detected at the
channel 0 is negative, then %Q0.3.0
is turned on and the value is
converted into a positive number.
Converting the data type from INT
to BCD and outputting the value
to %Q0.2.0 to %Q0.2.19.