Changing Image Confirmation Time (Lcd Confirm.) - Ricoh Caplio 500G wide User Manual

Changing Image Confirmation Time
(LCD CONFIRM.)
Immediately after you press the shutter release button, the still
image taken is displayed on the screen for a moment so you can
check it. By default, the image confirmation time is set to 1 second,
but this can be changed.
Available Settings
OFF (Image not displayed for confirmation)
0.5SEC.
1 SEC. *Default setting
2 SEC.
3 SEC.
To change the image confirmation time, follow the steps below.
1
Display the SETUP menu.
• For the operating procedure, see P.115.
2
Press the " button to select [LCD CONFIRM.] and
press the $ button.
3
Press the !" buttons to select
6
the desired setting.
4
Press the C/D button, or
# button and press the C/
D button.
Caution -----------------------------------------------------------------------------------------
When [LCD CONFIRM.] is set to 0.5 seconds, symbols such as the zoom bar may
remain on the monitor while the image is displayed.
124