Safety Information - Fluke 05-450 User Manual

Safety Information

A Warning identifies conditions and procedures that are dangerous to the user.
A Caution identifies conditions and procedures that can cause damage to the
Product or the equipment under test.
To prevent possible electrical shock, fire, or personal injury:
•
Read all safety information before you use the Product.
•
Carefully read all instructions.
•
Do not use the Product around explosive gas, vapor, or in
damp or wet environments.
•
Use the Product only as specified, or the protection
supplied by the Product can be compromised.
•
Use this Product indoors only.
•
Use only the mains power cord and connector approved for
the voltage and plug configuration in your country and
rated for the Product.
•
Replace the mains power cord if the insulation is damaged
or if the insulation shows signs of wear.
•
Make sure the ground conductor in the mains power cord is
connected to a protective earth ground. Disruption of the
protective earth could put voltage on the chassis that could
cause death.
•
Do not put the Product where access to the mains power
cord is blocked.
•
Do not operate the Product with covers removed or the
case open. Hazardous voltage exposure is possible.
•
Batteries contain hazardous chemicals that can cause
burns or explode. If exposure to chemicals occurs, clean
with water and get medical aid.
•
Have an approved technician repair the Product.
•
Use only specified replacement parts.
•
Do not use the Product if it is damaged.
•
Disable the Product if it is damaged.
•
Use only specified replacement fuses.
•
For continued protection against the risk of fire, replace
only with fuse of the specified type and current rating.
•
The operator or responsible body is cautioned that the
protection provided by the equipment may be impaired if
the equipment is used in a manner not specified by Fluke
Biomedical.
Warning
Digital Doorway Monitor
Safety Information
3