Table of Contents
Advertisement
05-450
Users Manual
Symbols
Table 1 shows the symbols used in this manual or on the Product.
Symbol
4
•
Only certified technician or calibration personnel should
replace battery.
•
Do not touch the circuit board in the calibration window due
to potential for electric shock.
•
Do not touch the center pin of the detector connector
unless the unit has been turned off and power has been
removed or at least 1 minute.
•
To prevent contact with internal hazardous live parts that
are accessible using a tool: turn off the Product and
disconnect the power cord. Allow the Product to sit for
1 minute before accessing internal components.
Risk of Danger. Important information. See Manual.
Hazardous voltage. Risk of electric shock.
AC (Alternating Current)
Protective conductor terminal
This product complies with the WEEE Directive (2002/96/EC) marking
requirements. The affixed label indicates that you must not discard this
electrical/electronic product in domestic household waste. Product
Category: With reference to the equipment types in the WEEE Directive
Annex I, this product is classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this product as unsorted
municipal waste. Go to Fluke's website for recycling information.
Table 1. Symbols
Description
Advertisement
Table of Contents
