Intended Use; Improper Use; Mounting And Installation - Allen-Bradley 1719 Ex I/O User Manual

Intended Use

Improper Use

Mounting and Installation

Backplane
1719-A22, 1719-A8, 1719-A24
EC-Type Examination Certificate: BVS 16 ATEX E 089 X
For additional certifications, refer to the 1719 Certification Bulletin, publication 1719-CT001.
II 3G Ex nA IIC T4 Gc
Digital output
1719-OB2, 1719-OB2L
EC-Type Examination Certificate: EXA 16 ATEX 0025X
For additional certifications, refer to the 1719 Certification Bulletin, publication 1719-CT001.
II 3(1) G Ex nA [ia Ga] IIC T4 Gc
II (1) D [Ex ia Da] IIIC
Power Supply
1719-PSDC
Statement of conformity: PF 08 CERT 1234 X
II 3 G Ex nA IIC T4 Gc
Communication Adapter
1719-AENTR
Type Examination Certificate: DEMKO 16 ATEX 1780X
For additional certifications, refer to the 1719 Certification Bulletin, publication 1719-CT001.
II 3 G Ex nA IIC T4 Gc
The device is only approved for appropriate and intended use. Ignoring these
instructions will void any warranty and absolve the manufacturer from any
liability.
The device must only be operated in the specified ambient temperature range and
at the specified relative humidity without condensation.
The I/O modules of the distributed I/O system act as an interface between
signals from the hazardous area and the non-hazardous area.
The I/O modules, adapters, and power supplies of the distributed I/O system
must only be used together with the respective backplanes.
Observe the product information sheets for the respective backplanes.
Protection of the personnel and the plant is not ensured if the device is not being
used according to its intended use.
Prior to mounting, installation, and commissioning of the device you should
make yourself familiar with the device and carefully read the product
information sheets.
Rockwell Automation Publication 1719-UM001C-EN-E - August 2018
Safety Chapter 1
13