Allen-Bradley 1794-IT8 Installation Instructions Manual
Flex i/o thermocouple input analog module and rtd module
Hide thumbs
Also See for 1794-IT8:
- User manual (76 pages) ,
- Installation instructions manual (16 pages)
Related Manuals for Allen-Bradley 1794-IT8
Summary of Contents for Allen-Bradley 1794-IT8
- Page 1 Datasheet Allen Bradley 1794-IRB 2018/9/7 Cambia Automation Limited Cambia Group Email:sales@cambia.cn Cell: 86 13599507613...
- Page 2 Follow these guidelines when you handle Allen-Bradley publication SGI-1.1, Safety Guidelines for the Application, Installation and this equipment: Maintenance of Solid-State Control (available from your local Rockwell Automation office), •...
- Page 3 3. Make sure the pins on the bottom of the module are straight so they module terminal base units. will align properly with the connector in the terminal base. 6. 1794-IT8 only: On 1794-TB3T or -TB3TS terminal base units, If you remove or insert the module while the WARNING...
- Page 4 7. If daisychaining power to the next terminal base, connect a jumper Example of 2, 3 and 4-wire RTD Wiring to a 1794-TB3 from terminal 51 (+V dc) on this base unit to the +V terminal on the Terminal Base Unit next base unit.
- Page 5 Channel 2 (Write word 1) Channel 3 (Write word 1) Channel 4 (Write word 2) Input Map (Read) for 1794-IR8 and 1794-IT8 Channel 5 (Write word 2) Dec. Channel 6 (Write word 2) Oct.
- Page 6 AS/NZS CISPR 11, Industrial Emissions channels scanned) Refer to thermocouple manufacturer for proper thermocouple extension. You use this category information for planning conductor routing as described in Allen-Bradley Open TC/RTD Circuit Out of range reading (upscale) publication 1770-4.1, Industrial Automation Wiring and Grounding Guidelines.
- Page 7 Publication 1794-IN021D-EN-P - August 2003 PN 957782-83 Supersedes Publication 1794-IN021C-EN-P - April 2002 and 1794-IN022B-EN-P - April 2002 Copyright © 2003 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Need help?
Do you have a question about the 1794-IT8 and is the answer not in the manual?
Questions and answers