ABB Navigator 540 Instruction Manual page 11

7
Configuration level menus
Accessing Configuration level menus
Wet-section configuration(s) and parameter value settings are made
at the Configuration level menus – see the associated wet-section
Operating Instructions for menu options:

Sodium wet-section – OI/AS0550-EN

Hydrazine wet-section – OI/AHM550-EN

Low level dissolved oxygen wet-section – OI/ADS550-EN
To enter Configuration Level menus:
1. Press the key (below the
Navigator
Tag 1
2.9
21.7 21.7
Na
The Operator menus are displayed:
Navigator
Operator Pages
4.28 4.28
Data Views
Logs
Alarm Acknowledge
21.7 21.7
Manual Hold
Autoscroll
Media Card
Enter Configuration
2. Press the key to select the Enter Configuration
menu and press the
The Access Level page is displayed:
Access Level
Read Only
Calibrate
Advanced
Service
Exit
3. Use the key to scroll to the Advanced access level and
press the key (below the Select prompt) to enter the top
level Configuration menus.
Use the / keys to scroll between top level menus and
press the key (below the Select prompt on each top level
menu) to enter that level.
CI/AWT540–EN Rev. C
icon):
10 : 34: 52
2012–04–15
ppb
°C
CAL
10 : 34: 52
2012–04–15
ppb
°C
key (below the icon).
Select
Configuration level menus overview
Calibrate
Calibrates the selected
wet-section
Sensor Setup
Sets units / ranges / filters /
enables – disables
flowmeters (if fitted)
Device Setup
Set tags / temperature units /
password (security) access
Display
Use to set display language
/operator templates / data
views
Input/Output
Configures analog outputs /
digital I/O
Process Alarm
Configures up to 8
(independent) process alarms
Media Card
Sets card status / selects
process data for logging /
enters file configuration
selection
Communication
Enters (Ethernet)
communication settings /
email details
Device Info
Displays read-only factory- set
transmitter / wet-section
details.
11