Installation; Product Features - HIKVISION DS-2CE17U8T-IT User Manual

To avoid heat accumulation, good ventilation is

required for the operating environment.
Keep the camera away from liquid while in use for

non-water-proof device.
While in delivery, the camera shall be packed in its

original packing, or packing of the same texture.
Mark Description
Mark
1 Introduction

1.1 Product Features

The camera is applicable for both indoor and outdoor
conditions, and the application scenarios include road,
warehouse, underground parking lot, bar, etc..
The main features are as follows:
8 MP high performance CMOS sensor

IR cut filter with auto switch

OSD menu with configurable parameters

Auto white balance

internal synchronization

SMART IR mode

3-axis adjustment

1.2 Overview
This manual applies to two types of bullet cameras.
The overviews of each type are shown in the figures
below.
1.2.1 Overview of Type I Camera
1.2.2 Overview of Type II Camera

2 Installation

Before you start:
Make sure that the device in the package is in good

condition and all the assembly parts are included.
Make sure that all the related equipment is power-off

during the installation.
Table 0-1 Mark Description
Description
DC Voltage
Bracket
Main Body
Lens
Figure 1-1 Overview of Type I Camera
Bracket
Main Body
Lens
Figure 1-2 Overview of Type II Camera
Power Cord
12 VDC
Video Cable
(TVI)
Video Cable
(CVBS)
Power Cord
12 VCD
Video Cable
(TVI)
Video Cable
(CVBS)