1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Fire Alarms
  5. FDCW221
  6. Technical manual

Siemens FDCW221 Technical Manual

Radio gateway, radio smoke detector, manual call point, radio base
Hide thumbs Also See for FDCW221:
Table of Contents

Advertisement

Quick Links

FDCW221, DOW1171,
SMF121, SMF6120
Radio gateway, radio smoke detector,
manual call point, radio base
Technical Manual
009865_m_en_--
2015-11-06
Building Technologies
Control Products and Systems

Advertisement

Table of Contents
loading

Related Manuals for Siemens FDCW221

Summary of Contents for Siemens FDCW221

  • Page 1 FDCW221, DOW1171, SMF121, SMF6120 Radio gateway, radio smoke detector, manual call point, radio base Technical Manual Building Technologies 009865_m_en_-- 2015-11-06 Control Products and Systems...
  • Page 2 Issued by: Siemens Switzerland Ltd. Building Technologies Division International Headquarters Gubelstrasse 22 CH-6301 Zug Tel. +41 41 724-2424 www.siemens.com/buildingtechnologies Edition: 2015-11-06 Document ID: 009865_m_en_-- © Siemens Switzerland Ltd, 2007 2 | 82 Building Technologies 009865_m_en_-- Fire Safety 2015-11-06...

  • Page 3: Table Of Contents

    Safety ....................13 Safety instructions ..................13 Safety regulations for the method of operation ...........15 Standards and directives complied with............17 Release Notes ...................17 Structure and function ................. 18 Structure of the radio gateway FDCW221 ..........20 3.1.1 Overview ..................20 3.1.2 Internal view ................21 3.1.3 Connections ................22...
  • Page 4 3.10.3.1 Normal operation ............37 3.10.3.2 Start-up operation ............37 3.10.3.3 Configuration operation ..........37 3.10.4 Line separator in the radio gateway FDCW221 ......38 3.10.5 Status display on the radio gateway FDCW221 ......39 3.10.6 Status display on the radio smoke detector DOW1171 and on the radio base SMF6120 ..........
  • Page 5 Replace radio gateway ................71 Replacing radio detectors ................71 Replacing the glass plate on the manual call point SMF121 .......72 7.10 Updating the firmware of radio gateway FDCW221 ........73 Specifications ..................74 Technical data for the radio gateway FDCW221.........74 Technical data for radio smoke detector DOW1171........76 Technical data for manual call point SMF121 and radio base SMF6120 ..77...
  • Page 6 6 | 82 Building Technologies 009865_m_en_-- Fire Safety 2015-11-06...

  • Page 7: About This Document

    About this document Applicable documents 1 About this document Goal and purpose This document describes the devices ● Radio gateway FDCW221 ● DOW1171 radio smoke detector ● Manual call point SMF121 ● Radio base SMF6120 and how to integrate the devices into the fire detection system FDnet.
  • Page 8 About this document Applicable documents Source language and reference document ● The source/original language of this document is German (de). ● The reference version of this document is the international version in English. The international version is not localized. Document identification The document ID is structured as follows: ID code Examples...

  • Page 9: Applicable Documents

    FS20 Fire detection system - Commissioning, Maintenance, Troubleshooting 009718 Technical Manual Intelligent detector tester FDUD293 009854 Installation MCL-USB Adapter FDUZ221 010087 Data sheet Radio fire detection system FDCW221, DOW1171, SMF6120, SMF121 A6V10200368 Installation Radio base SMF6120, Manual call point SMF121 A6V10217915 Installation RadioSpy A6V10229812...

  • Page 10: Technical Terms

    About this document Technical terms 1.3 Technical terms Term Explanation Alarm indicator Decibel: logarithmic relationship between two levels. DOW1171 Radio smoke detector DZW1171 Radio test set External alarm indicator Electromagnetic compatibility Effective Radiated Power FDnet Addressed detector line FDUL221 Line tester FDUZ221 MCL-USB adapter.

  • Page 11: Revision History

    Editorial changes made, difference between FS20/FC20 revised; number of batteries for SMF6120 and DOW1171 corrected; document numbers of mounting instructions for FDCW221 and DOW1171/DBW1171 adapted; new standard, VdS approvals and CPD numbers for FDCW221 and DOW1171 added to technical data...
  • Page 12 About this document Revision history The table below shows the published language versions with the corresponding modification index: Modification index en_-- de_-- fr_-- it_-- es_-- – – – – – – – – – – – – – – – –...

  • Page 13: Safety

    Safety Safety instructions 2 Safety 2.1 Safety instructions The safety notices must be observed in order to protect people and property. The safety notices in this document contain the following elements: ● Symbol for danger ● Signal word ● Nature and origin of the danger ●...
  • Page 14 Safety Safety instructions How risk of injury is presented Information about the risk of injury is shown as follows: WARNING Nature and origin of the danger Consequences if the danger occurs ● Measures / prohibitions for danger avoidance How possible damage to property is presented Information about possible damage to property is shown as follows: NOTICE Nature and origin of the danger...

  • Page 15: Safety Regulations For The Method Of Operation

    2.2 Safety regulations for the method of operation National standards, regulations and legislation Siemens products are developed and produced in compliance with the relevant European and international safety standards. Should additional national or local safety standards or legislation concerning the planning, mounting, installation,...
  • Page 16 Disregard of the safety regulations Before they are delivered, Siemens products are tested to ensure they function correctly when used properly. Siemens disclaims all liability for damage or injuries caused by the incorrect application of the instructions or the disregard of danger warnings contained in the documentation.

  • Page 17: Standards And Directives Complied With

    Safety Standards and directives complied with 2.3 Standards and directives complied with A list of the standards and directives complied with is available from your Siemens contact. 2.4 Release Notes Limitations to the configuration or use of devices in a fire detection installation with a particular firmware version are possible.

  • Page 18: Structure And Function

    Release Notes 3 Structure and function The radio gateway FDCW221 is used to monitor signals from radio detectors and to transfer them via the FDnet to a fire control panel. The radio gateway is operated on the FDnet. All devices which can be monitored by the radio gateway are collectively known as a 'radio detectors'.
  • Page 19 Structure and function Release Notes Features of the radio smoke detector DOW1171 ● Consistent response to different fires ● Dynamic analysis of the sensor signal in the radio smoke detector itself ● Built-in diagnosis algorithms with automatic selftest ● High degree of immunity towards false alarms and environmental influences ●...

  • Page 20: Structure Of The Radio Gateway Fdcw221

    Structure and function Structure of the radio gateway FDCW221 3.1 Structure of the radio gateway FDCW221 3.1.1 Overview Overall view of radio gateway 1 LED red/green 4 Magnet movement for Reed contact 2 Housing cover 5 Unlocking for housing cover...

  • Page 21: Internal View

    Structure and function Structure of the radio gateway FDCW221 3.1.2 Internal view Internal view of radio gateway 9 V battery with clip 'LINE' spring clips for the FDnet detector line Battery cable connection Brackets for cable strain relief using cable ties...

  • Page 22: Connections

    Structure and function Structure of the radio gateway FDCW221 3.1.3 Connections The radio gateway FDCW221 has connections for: ● The FDnet detector line ● The shieldings of the detector line cables The two 'SHIELD' connection terminals are internally linked to one another.

  • Page 23: Reed Contact And Button

    Reed contact with a magnet. See also 2 Internal view [➙ 21] 2 Status display on the radio gateway FDCW221 [➙ 39] 2 Overview [➙ 20] 3.1.6 Scope of delivery The radio gateway is supplied with the following accessories: ●...

  • Page 24: Structure Of The Radio Smoke Detector Dow1171

    Structure and function Structure of the radio smoke detector DOW1171 3.2 Structure of the radio smoke detector DOW1171 Radio smoke detector DOW1171 with base DBW1171 1 DBW1171 base 2 DOW1171 radio smoke detector The radio smoke detector DOW1171 works in line with the scattered light principle. An infrared LED sends short, intense light pulses to the scattering volume.
  • Page 25 Structure and function Structure of the radio smoke detector DOW1171 Battery compartment and log-on button on the DOW1171 1 Battery compartment for two 9 V 2 'New' log-on button lithium manganese dioxide batteries See also 2 DBW1171 base [➙ 32] 2 Structure of the radio smoke detector DOW1171 [➙...

  • Page 26: Parameter Sets For The Radio Smoke Detector Dow1171

    Structure and function Structure of the radio smoke detector DOW1171 3.2.1 Parameter sets for the radio smoke detector DOW1171 The radio smoke detector DOW1171 has efficient detection algorithms to distinguish between fire events and deceptive phenomena. Measured values above a response threshold are not the only basis for reaching a danger level. The smoke density progression is also observed over a longer period of time and evaluated using algorithms.

  • Page 27: Structure Of The Manual Call Point Smf121 And Radio Base Smf6120

    Structure and function Structure of the manual call point SMF121 and radio base SMF6120 3.3 Structure of the manual call point SMF121 and radio base SMF6120 Figure 1: Manual call point SMF121 and radio base SMF6120 1 Manual call point SMF121 2 Radio base SMF6120 The manual call point SMF121 can only be used together with the radio base SMF6120.

  • Page 28: Product Version Es

    Structure and function Product version ES 3.4 Product version ES The product version ES provides the technical status of a device in terms of software and hardware. The product version is provided as a two-digit number. You will find the details of your device's product version: ●...

  • Page 29: Details For Ordering

    DOW1171 S24218-F62-A8 Radio smoke detector (without base, without batteries) SMF121 V24217-C1218-W200 International manual call point (Siemens) SMF121 V24217-C1218-W100 Neutral manual call point SMF6120 S24218-F72-A1 Radio base for SMF121 The SMF6120 radio base may only be used as a replacement device in fire detection installations that were installed prior to April 1, 2011! 3.6 RadioSpy...

  • Page 30: Accessories For The Fdcw221 Radio Gateway

    Structure and function Accessories for the FDCW221 radio gateway 3.7 Accessories for the FDCW221 radio gateway 3.7.1 9 V lithium manganese dioxide battery ● For supplying radio detectors, radio gateways and service devices with power ● EVE lithium manganese dioxide type CR9V/P-S Li/MnO2 9 V, 1.2 Ah battery with pin cover...

  • Page 31: Radio Test Set Dzw1171

    Structure and function Accessories for the FDCW221 radio gateway 3.7.5 Radio test set DZW1171 ● For measuring the field strength in buildings ● Planning tool when setting up radio networks ● Two-part test unit: ● For details, see document 004446 ●...

  • Page 32: Accessories For Radio Smoke Detector Dow1171

    Structure and function Accessories for radio smoke detector DOW1171 3.8 Accessories for radio smoke detector DOW1171 3.8.1 DBW1171 base ● For installing radio smoke detectors ● Compatible with: ● Order no.: S24218-F316-A1 3.8.2 9 V lithium manganese dioxide battery ● For supplying radio detectors, radio gateways and service devices with power ●...

  • Page 33: Protective Cage Dbz1194

    Structure and function Accessories for radio smoke detector DOW1171 3.8.5 Protective cage DBZ1194 ● To protect the devices against mechanical damage ● Can only be used in conjunction with the following accessories: ● Order no.: BPZ:4677110001 3.8.6 Designation plate DBZ1193A ●...

  • Page 34: Accessories For Manual Call Point Smf121 With Radio Base Smf6120

    Structure and function Accessories for manual call point SMF121 with radio base SMF6120 3.9 Accessories for manual call point SMF121 with radio base SMF6120 3.9.1 3.6 V lithium battery ● For supplying radio detectors with power ● TADIRAN SL-760 lithium battery (3.6 V, 2.2 Ah) ●...

  • Page 35: Function

    Structure and function Function 3.10 Function The FDCW221 communicates with the control panel via the FDnetdetector line. The range of the radio signal in buildings is up to 40 m and is heavily dependent on materials and equipment. If the radio cells overlap, the maximum number of radio gateways is limited to 16 radio gateways or radio cells because of the limited number of channels available.

  • Page 36: Radio Gateway Fdcw221 Diagnosis Levels

    Structure and function Function 3.10.1 Radio gateway FDCW221 diagnosis levels The radio gateway monitors its operation largely autonomously. The following diagnosis levels are derived from the different control measurements: ● Normal ● Replacement recommended ● Replacement necessary ● Fault For details, see table below.

  • Page 37: Behavior In Degraded Mode

    The information in the 'List of compatibility' and in the corresponding control panel documentation must be taken into account during project planning. 3.10.3 Operation modes of the radio gateway The radio gateway FDCW221 has the following operation modes: ● Normal operation ●...

  • Page 38: Line Separator In The Radio Gateway Fdcw221

    In terms of topology, the radio detectors logged onto the radio gateway are in a stub. The stub branches off on the FDnet detector line between the FDCW221 and the integrated line separator FDCL221 of the radio gateway (see figure below).

  • Page 39: Status Display On The Radio Gateway Fdcw221

    Structure and function Function 3.10.5 Status display on the radio gateway FDCW221 The radio gateway has three internal LEDs (amber, red, green) and a red/green LED in the cover. The flash sequences are displayed in parallel on the two green LEDs or the two red LEDs.
  • Page 40 Flashes rapidly Flashes rapidly Several radio detectors have already been detected for logging off (Note: RadioSpy must be used to log off radio detectors) Status of radio gateway FDCW221 Legend LEDs: Flashes slowly 1x / second Flashes rapidly 4x / second...

  • Page 41: Status Display On The Radio Smoke Detector Dow1171 And On The Radio Base Smf6120

    Structure and function Function 3.10.6 Status display on the radio smoke detector DOW1171 and on the radio base SMF6120 The radio smoke detector DOW1171 and the radio base SMF6120 have a status indicator. In configuration operation, the status indicator displays flash sequences to indicate the field strength.

  • Page 42: Power Supply

    Structure and function Function 3.10.7 Power supply Radio gateway FDCW221 The radio gateway is normally powered via the FDnet detector line. Should the mains voltage fail, the radio gateway is powered via the battery in the control panel. Brief open lines (<5 hours) on the detector line can be bridged by the 9 V lithium manganese dioxide batteries.

  • Page 43: Planning

    Planning Compatibility 4 Planning When planning a project, proceed as follows: ● Use a suitable radio test set to measure the local radio wave propagation (field strength measurement) in the building. ● Plan how to split the radio coverage into individual radio cells. You will need this information for the number and positioning of the radio gateways.

  • Page 44: Usage Conditions

    ● Note the usage conditions and the 'Defining the place of mounting' and 'Transmission field' chapters. The following usage conditions apply to the radio gateway FDCW221 and the radio detectors: ● The radio gateway and the radio detectors must be easily accessible for the service staff at all times: –...

  • Page 45: Transmission Field

    Planning Transmission field 4.3 Transmission field In the open, the field strength falls with a factor of 1/r², i.e. a doubling of distance in the open equates to a 6 dB increase in damping. In buildings, the factor in a first approximation is 1/r , i.e.
  • Page 46 Planning Transmission field Construction Additional damping Damp bricks around 10 dB Coated plasterboard (double wall) around 15 dB Armored concrete around 30 dB Thick, damp brick wall >40 dB Sample calculation: A radio gateway is fitted under an armored concrete ceiling. The partition walls are made from concrete.

  • Page 47: Defining The Place Of Mounting

    Planning Defining the place of mounting 4.4 Defining the place of mounting General restrictions/system limits Maximum number of radio detectors per radio gateway Maximum distance between radio gateway and radio detector 40 m or 90 dB WARNING Several radio gateways using the same basic channel Faults or malfunctions will arise.

  • Page 48: Mounting/Installation

    Mounting/Installation Installing and connecting the radio gateway FDCW221 5 Mounting/Installation 5.1 Installing and connecting the radio gateway FDCW221 NOTICE Damage to spring clips or contact problems If the cable cross-sections you want to connect to the radio gateway are larger than 1.5 mm...
  • Page 49 Mounting/Installation Installing and connecting the radio gateway FDCW221 Procedure: WARNING Short-circuit as a result of incorrectly inserting batteries Warming of batteries and risk of fire ● When inserting battery, note polarity. w The detector line is switched off. 1. Remove the two stickers featuring the serial number from the back box.

  • Page 50: Installing The Radio Smoke Detector Dow1171

    5.2 Installing the radio smoke detector DOW1171 w Ensure that the radio smoke detector DOW1171 is connected to the radio gateway FDCW221 from its intended location. 1. Define the mounting location of the base such that the alarm indicator of the radio smoke detector DOW1171 is clearly visible from the investigation route.
  • Page 51 Mounting/Installation Installing the radio smoke detector DOW1171 Inserting the batteries WARNING Short-circuit as a result of incorrectly inserting batteries Warming of batteries and risk of fire ● When inserting battery, note polarity. Insert the batteries in the devices just before commissioning the fire detection installation.
  • Page 52 Mounting/Installation Installing the radio smoke detector DOW1171 Installing the detector locking device Install a detector locking device DBZ1190 (accessory) if necessary Installing the detector locking device DBZ1190 1 DBW1171 base 2 DBZ1190 detector locking device If you use the detector locking device DBZ1190, you can only unlock radio smoke detectors inserted in the base DBW1171 using a screwdriver.

  • Page 53: Installing The Radio Base Smf6120 And Manual Call Point Smf121

    Installing the radio base SMF6120 w Ensure that the radio base SMF6120 is connected to the radio gateway FDCW221 from its intended location. Secure the radio base at a height of 1.3…1.6 m on a level surface using suitable screws. Use the mounting openings (1).
  • Page 54 Mounting/Installation Installing the radio base SMF6120 and manual call point SMF121 Installing the manual call point SMF121 w The radio base SMF6120 is already installed. 1. Open the door of the manual call point using a suitable key. 2. Break out the opening (2) on the rear of the manual call point's housing. 3.
  • Page 55 Mounting/Installation Installing the radio base SMF6120 and manual call point SMF121 Inserting batteries WARNING Short-circuit as a result of incorrectly inserting batteries Warming of batteries and risk of fire ● When inserting battery, note polarity. Insert the batteries in the devices just before commissioning the fire detection installation.
  • Page 56 Mounting/Installation Installing the radio base SMF6120 and manual call point SMF121 View inside manual call point SMF121 1 Reset slider 2 Alarm button See also 2 3.6 V lithium battery [➙ 34] 56 | 82 Building Technologies 009865_m_en_-- Fire Safety 2015-11-06...

  • Page 57: Commissioning

    3. Start up radio gateway on detector line. See also 2 RadioSpy [➙ 29] 2 Status display on the radio gateway FDCW221 [➙ 39] 2 Starting up the radio gateway [➙ 58] 2 Logging radio detectors on to the radio gateway [➙ 59] 2 Starting up the radio gateway on the detector line [➙...

  • Page 58: Starting Up The Radio Gateway

    Commissioning Starting up the radio gateway 6.2 Starting up the radio gateway Before radio detectors can be logged on to the radio gateway, the radio gateway must be started up. WARNING Several radio gateways using the same basic channel The radio detectors communicate using several radio gateways. Faults or malfunctions will arise.

  • Page 59: Logging Radio Detectors On To The Radio Gateway

    Commissioning Logging radio detectors on to the radio gateway 6.3 Logging radio detectors on to the radio gateway Radio detectors can log on to a radio gateway which has just started up or also be added to the existing configuration of a radio cell. In each case, the button in the radio gateway has to be pressed briefly to either change from the exited 'Scan mode for the basic channel' or from normal operation to configuration operation.

  • Page 60: Starting Up The Radio Gateway On The Detector Line

    In terms of topology, the radio detectors logged onto the radio gateway are in a stub. The stub passes through the FDnet detector line between the FDCW221 and the integrated line separator FDCL221 of the radio gateway. The order in which the radio detectors log on determines the order on the stub.

  • Page 61: Logging Radio Detectors Off The Radio Gateway

    LEDs flash quickly in turn. RadioSpy must then be used for logging off. See also 2 RadioSpy [➙ 29] 2 Status display on the radio gateway FDCW221 [➙ 39] 61 | 82 009865_m_en_-- Building Technologies...

  • Page 62: Resetting The Radio Gateway To Delivery Status

    Commissioning Resetting the radio gateway to delivery status 6.6 Resetting the radio gateway to delivery status The radio gateway is reset to the delivery status if the existing configuration is to be deleted. For example, if the radio gateway is to occupy another basic channel. NOTICE Resetting the radio gateway to delivery status An existing configuration is deleted.

  • Page 63: Resetting The Dow1171 To Delivery Status

    Commissioning Resetting the DOW1171 to delivery status 6.7 Resetting the DOW1171 to delivery status NOTICE Resetting the radio smoke detector to delivery status All existing configurations are deleted. ● Only reset the radio smoke detector to its delivery status if the existing configurations can be deleted.
  • Page 64 Commissioning Resetting the DOW1171 to delivery status Procedure: 1. Unscrew the radio smoke detector DOW1171 from the base. 2. Remove both batteries from the bracket and pull the clips out off the battery contacts. 3. Wait 10 seconds for the batteries to discharge. 4.

  • Page 65: Resetting The Smf6120 To Delivery Status

    Commissioning Resetting the SMF6120 to delivery status 6.8 Resetting the SMF6120 to delivery status NOTICE Resetting the manual call point with radio base to delivery status All existing configurations are deleted. ● Only reset the radio smoke detector to its delivery status if the existing configurations can be deleted.
  • Page 66 Commissioning Resetting the SMF6120 to delivery status Figure 6: View inside radio base SMF6120 1 'New' log-on button 3 Status indicator 2 Battery plug connections 4 3.6 V lithium AA batteries Procedure: 1. Unscrew the manual call point SMF121 from the radio base SMF6120. 2.

  • Page 67: Maintenance / Troubleshooting

    4. Switch the detector line on. Dispose of batteries in an environmentally friendly manner and observe national guidelines and regulations. See also 2 Status display on the radio gateway FDCW221 [➙ 39] 2 9 V lithium manganese dioxide battery [➙ 30] 67 | 82 009865_m_en_--...

  • Page 68: Changing Batteries On The Dow1171

    Maintenance / troubleshooting Changing batteries on the DOW1171 7.2 Changing batteries on the DOW1171 The two batteries in the radio smoke detector must be replaced when a battery fault for the radio gateway appears on the control panel. WARNING Short-circuit as a result of incorrectly inserting batteries Warming of batteries and risk of fire ●...

  • Page 69: Changing Batteries On The Smf6120

    Maintenance / troubleshooting Changing batteries on the SMF6120 7.3 Changing batteries on the SMF6120 The two batteries in the manual call point with radio base must be replaced when a battery fault for the manual call point with radio base appears on the control panel. WARNING Short-circuit as a result of incorrectly inserting batteries Warming of batteries and risk of fire...

  • Page 70: Status Query

    Maintenance / troubleshooting Status query 7.4 Status query The radio gateway is equipped with the MC link (Maintenance and Commissioning Link). This interface can be used to query the following data using the detector exchanger and tester FDUD292 or intelligent detector tester FDUD293 (as of software V2.1): ●...

  • Page 71: Replace Radio Gateway

    Maintenance / troubleshooting Replace radio gateway 7.7 Replace radio gateway Using RadioSpy is the preferred way of replacing a radio gateway. All radio detector configurations can then be transferred. Note the connection assignment of the line cables when replacing the radio gateway.

  • Page 72: Replacing The Glass Plate On The Manual Call Point Smf121

    Maintenance / troubleshooting Replacing the glass plate on the manual call point SMF121 7.9 Replacing the glass plate on the manual call point SMF121 w A new glass plate is ready. w The manual call point SMF121 is installed on the radio base SMF6120. 1.

  • Page 73: Updating The Firmware Of Radio Gateway Fdcw221

    Note the number of devices on the detector line for the check after the update; see step 12. 4. Connect the radio gateway FDCW221 to the PC via the MC link cable and an FDUZ221/227. 5. Ensure that radio gateway FDCW221 is supplied with power via the line tester FDUL221.

  • Page 74: Specifications

    Technical data for the radio gateway FDCW221 8 Specifications 8.1 Technical data for the radio gateway FDCW221 You will find information on approvals, CE marking, and the relevant EU directives for this device (these devices) in the following document(s); see 'Applicable documents' chapter: ●...
  • Page 75 Specifications Technical data for the radio gateway FDCW221 Battery Number of batteries Voltage DC 9 V Type: Block / Li/MnO2 ULTRALIFE U9VL-J or EVE CR9V/P-S ● Capacitance 1200 mAh ● Service life >5 years Battery voltage monitored Connections Detector line: ●...

  • Page 76: Technical Data For Radio Smoke Detector Dow1171

    Specifications Technical data for radio smoke detector DOW1171 8.2 Technical data for radio smoke detector DOW1171 You will find information on approvals, CE marking, and the relevant EU directives for this device (these devices) in the following document(s); see 'Applicable documents' chapter: ●...

  • Page 77: Technical Data For Manual Call Point Smf121 And Radio Base Smf6120

    Specifications Technical data for manual call point SMF121 and radio base SMF6120 8.3 Technical data for manual call point SMF121 and radio base SMF6120 You will find information on approvals, CE marking, and the relevant EU directives for this device (these devices) in the following document(s); see 'Applicable documents' chapter: ●...

  • Page 78: Dimensions

    Specifications Dimensions 8.4 Dimensions Radio gateway FDCW221 213.5 33.4 Radio smoke detector DOW1171 with base DBW1171 Ø 119 Ø 115 Manual call point SMF121 with radio base SMF6120 78 | 82 Building Technologies 009865_m_en_-- Fire Safety 2015-11-06...

  • Page 79: Environmental Compatibility And Disposal

    Specifications Environmental compatibility and disposal 8.5 Environmental compatibility and disposal This equipment is manufactured using materials and procedures which comply with current environmental protection standards as best as possible. More specifically, the following measures have been undertaken: ● Use of reusable materials ●...

  • Page 80: Index

    Index Index Field strength Application area Link quality Ambient conditions Field strength measurements Approvals 74, 76, 77 Fire control panel failure Degraded mode operation Cable with shielding Firmware CE marking 74, 76, 77 Update 22, 73 Collective behavior Frequency range Degraded mode operation Commissioning Impact...
  • Page 81 Index Reed contact Radio base Magnet Status indicator Radio cell Short-circuit Radio detector Line separator Logging on to the radio gateway Smoke sensitivity Radio module Source language SPU60xx Standards 75, 76, 77 Radio smoke detector Status indicator Parameter sets Field strength Smoke sensitivity Status indicator Radio test set...
  • Page 82 Issued by © Siemens Switzerland Ltd, 2007 Siemens Switzerland Ltd Technical specifications and availability subject to change without notice. Building Technologies Division International Headquarters Gubelstrasse 22 CH-6301 Zug +41 41-724 24 24 www.siemens.com/buildingtechnologies Document ID: 009865_m_en_-- Manual FD20 Edition: 2015-11-06...

This manual is also suitable for:

Smf6120Smf121Dow1171

Table of Contents