The S4810 System; Introduction - Dell S4810 Installing Manual

The S4810 System

Introduction

The Dell Force10 S4810 platform has 640Gbps switching bandwidth. It supports forty-eight 10GbE
SFP+ ports, four 40GbE QSFP+ ports, and two power supplies for redundancy. For system access, the
S4810 includes an RS-232/RJ-45 console port and a management port. The S4810 Power Supply Unit
(PSU) side (Figure 2-1) contains the PSU and fan modules. The S4810 Input/Output (I/O) side
(Figure 2-2) contains the 48 1G/10G SFP+ auto-sensing ports, four 40G QSPFP ports, management ports,
and stacking identification.
Figure 2-1. S4810 PSU-Side View
Mounting Bracket
PSU0
Grounding
Power Supply (PSU0)
Screw
Figure 2-2. S4810 I/O-Side View
1G/10G SFP+ Ports
NOTE: The SFP+ ports (
with the airflow from the small vent holes above and below the ports.
Fan Module 0
Figure 2-2
) are labeled 0-47. When you cable these ports, be sure not to interfere
Fan Module 1
Power Supply (PSU1)
RS-232/RJ-45
Console Port
40GE QSFP+
Ports
2
Mounting Bracket
PSU1
System
LEDs
Management
(Ethernet) Port
The S4810 System | 9