Dell S4810 Installing Manual page 22

Step Task (continued)
Attach the brackets to the PSU sides of the chassis using four screws for each bracket. Attach the bracket so that
3
the "ear" is parallel to the PSU and the outside of the chassis.
Power Supply
Attach the long bracket to each side of the chassis using the provided countersink screws. Use two screws on each
4
side of the chassis.
PSU Side
Install the rack mount ears into the I/O-facing posts using rack mount screws (not included with the system).
5
NOTE:
Using the provided pan head screws, attach the rack ears on the I/O facing posts to the long bracket (attached to
6
the system). Tighten the pan head screws to secure.
22 | Install the S4810
View from chassis I/O side
View of chassis PSU side
Connect to
Rack/Cabinet
(ears)
The rack mount ears must be mounted so that the system is level when fully installed.
Connect to
Rack/Cabinet
(ears)
Screws
Screws
I/O side
Long brackets