Storing Components - Dell S4810 Installing Manual

The system is powered-up as soon as the power cord is connected between the system and the power
source.
CAUTION: Always disconnect the power cable before you service the power supply slots.
CAUTION: Use the power supply cord as the main disconnect device on the AC system. Ensure that the
socket-outlet is located/installed near the equipment and is easily accessible.

Storing Components

If you do not install your S4810 and components immediately, Dell Force10 recommends properly
storing the system and all optional components until you are ready to install them.
WARNING: Electrostatic discharge (ESD) damage can occur when components are mishandled. Always
wear an ESD-preventive wrist or heel ground strap when handling the S4810 and its accessories. After you
remove the original packaging, place the S4810 and its components on an antistatic surface.
Follow these storage guidelines:
• Storage temperature must remain constant ranging from -4° to 158° F (-20°C to 70° C).
• Store on a dry surface or floor, away from direct sunlight, heat, and air conditioning ducts.
• Store in a dust-free environment.
Site Preparations | 17