Remove The Server Module From The Sun Blade Chassis - Sun Oracle Sun Blade X3-2B Service Manual

Managing the Locate LED
Oracle Integrated Lights Out Manager (ILOM) 3.1 Documentation Collection
■
(http://www.oracle.com/pls/topic/lookup?ctx=ilom31)
▼
Manage the Locate LED Remotely From Oracle ILOM CLI
Log in to the Oracle ILOM CLI.
1
See
Administration
The CLI prompt appears:
–>
Type one of the following commands:
2
To turn on the Locate LED, type:
■
–> set /System/ locator_indicator=on
To turn off the Locate LED, type:
■
–> set /System/ locator_indicator=off
To verify the status of the Locate LED, type:
3
–> show /System/ locator_indicator
The output of the command appears:
/System
Properties:
locator_indicator = Off
The value locator_indicator shows the status as either On or Off.
"Manage the Locate LED Remotely From Oracle ILOM SP Web Interface" on page 35
See Also ■
Oracle Integrated Lights Out Manager (ILOM) 3.1 Documentation Collection
■
(http://www.oracle.com/pls/topic/lookup?ctx=ilom31)
▼

Remove the Server Module from the Sun Blade Chassis

The server module must be removed from the Sun Blade 6000 chassis to:
Service CRU and FRU internal system components such as: system battery, cables, rear USB
■
drives, DIMMs, processors (CPU), REMs and FEMs.
Access Fault Remind buttons for processors and DIMMs.
■
36 Sun Blade X3-2B (formerly Sun Blade X6270 M3) Service Manual • May, 2014
"Access Oracle ILOM Using CLI" in Sun Blade X3-2B (formerly Sun Blade X6270 M3)
Guide.