Terminal Settings - Allen-Bradley PanelView Plus 7 User Manual

Terminal Settings

Table 19 - Terminal Settings
Select This Option
Alarms
Diagnostics Setup
Display
Desktop Access Setup
File Management
Font Linking
Input Devices
File Integrity Check
Networks and Communications
Print Setup
Startup Options
System Event Log
System Information
Time/Date/Regional Settings
The terminal has settings that you can adjust that are not specific to the
application.
1. Press Terminal Settings from the FactoryTalk View ME Station dialog
box.
2. Select an option by touching the up and down cursors.
3. Press Enter to access selected function.
If You Want To
Close the alarm display on the terminal when an operator acknowledges the newest alarm. By default, the alarm display is closed.
Edit the location where diagnostic messages are saved and determine what kind of messages are saved.
Adjust the brightness of the display, configure the screen saver, and enable/disable the touch screen cursor.
Allow or restrict access to the desktop. Set or reset the desktop password.
Copy application files and font files to the terminal, an SD card, or a USB drive. You can also delete application files, log files, and font
files.
Link a font file to a base font loaded on the terminal.
Configure settings for the keypad, attached keyboard, mouse, or touch screen, including touch screen calibration. You can also choose
between a pop-up character input or pop-up keyboard for string input.
Check the integrity of the .mer application file and runtime files by logging details to a file integrity check log. You can view and clear
this log at any time.
Configure Ethernet and other communication settings for an application.
Configure settings that are used to print displays, alarm messages, or diagnostics messages that the application generates.
Specify whether the terminal launches the desktop, an application, or FactoryTalk View ME Station Configuration mode on startup.
Display system events, and clear events from the log.
Display power, battery, and memory details for the terminal. You can also view the firmware revision for FactoryTalk View ME Station,
and other software that is loaded on the terminal. Technical support information.
Set the date, time, language, and numeric format that is used by terminal and applications.
Rockwell Automation Publication 2711P-UM007D-EN-P - December 2015
Configure Terminal Settings Chapter 3
43