Reset The Desktop Password - Allen-Bradley PanelView Plus 7 User Manual

Chapter 3 Configure Terminal Settings
50

Reset the Desktop Password

To clear and change the current password, you must correctly respond to the
current challenge question. If you do not remember the response, you must
restore the terminal to its factory defaults. Refer to
Operations on page
IMPORTANT You can reset the password and challenge questions if access to the desktop
is restricted or set to disallow.
Follow these steps to reset the desktop password.
1. Press Reset Password from the Desktop Access Management dialog box.
2. Press Answer Challenge and enter the correct response to the current
challenge question.
3. Press Clear Password to clear the current password and challenge
question.
The dialog box shows the updated status of the password and challenge
information.
4. Press Close.
5. Refer to Set a Desktop Password on page 49
challenge question.
After clearing the password, you must set a new desktop password or
change the desktop access to 'Allow' .
Rockwell Automation Publication 2711P-UM007D-EN-P - December 2015
143.
Maintenance Mode
to set a new password and