Initial Startup; Reset The Terminal - Allen-Bradley PanelView Plus 7 User Manual

Chapter 2 Install the PanelView Plus 7 Standard Terminal

Initial Startup

Reset the Terminal

40
The first time that you start the system, the terminal goes through its start-up
sequence and launches FactoryTalk View ME Station in Configuration mode.
To change the action that occurs at startup, press Terminal Settings, then tap
Startup Options. You can configure one of these options:
• Launch a FactoryTalk View ME HMI application.
• Launch FactoryTalk View ME Station in Configuration mode (default).
• Launch the Windows desktop.
EXAMPLE Terminals are initially shipped with desktop access disabled. You can
configure your terminal to allow desktop access.
For more information on how to change the start-up option and desktop
access, see Chapter
There are several ways to restart the terminal without having to disconnect and
reapply power:
• From FactoryTalk View ME Station Configuration Mode, tap Reset.
• From the terminal desktop Start Menu, choose Programs>Restart
System.
• To access Maintenance Mode, follow these steps.
a. Plug in a USB keyboard.
b. Press and hold the white box that appears in the bottom left corner
when the terminal is booting up.
Refer to Maintenance Mode Operations on page 143
restart the terminal from Maintenance Mode.
Rockwell Automation Publication 2711P-UM007D-EN-P - December 2015
3, Configure Terminal Settings.
for details on how to