Storing Text Tags - Radio Shack PRO-2055 User Manual

Beyond the Basics
5. Enter the UHF trunking frequency and press ENT.
6. Repeat Steps 4 and 5 to enter the other trunking
group frequencies for EDACS or additional control
channel frequencies for Motorola systems.
7. If necessary, press MODE to change the receiving
mode.

storing text tags

You can customize your scanner by storing text tags
(up to 16 characters) for easy identifi cation of channel
transmissions, trunk IDs, or banks.
assigning a text tag to a channel
1. Press MAN, enter the channel number where you
want to enter the text, then press MAN again. M and
the bank and channel number appear at the upper
left corner of the display (for example: M100).
2. Press PROG. M changes to P.
3. Press TEXT. The cursor appears at the third line.
4. Enter the text using the numeral keys (see "Text
Input Chart").
If you make a mistake, press
Note Note
character you want to change.
For example, to identify amateur (ham) radio
transmissions in the 6 meter range, input "HAM
6m" as follows:
e or
36
d to move to the