The Basics
step 1: install your scanner
You can mount your trunking scanner in your vehicle,
install it for mobility, or install it as a base station.
mounting your scanner in your
dashboard
If you are unsure about how to install your scanner in
your vehicle, consult your automobile manufacturer,
dealer, or a qualifi ed installer. Before installing, confi rm
your scanner fi ts in the
desired mounting area and
you have all the necessary
materials. Your scanner
requires a 2 x 7
inch (50 x 180 x 135 mm)
mounting area.
1. Remove the four
rear screws and pull
off the black case
before installing your
scanner.
2. Install the DIN sleeve
into the opening in
your dashboard, lip
facing out.
3. Push out the top and
bottom tabs to hold
the sleeve fi rmly in
place.
4. Slide the scanner into the sleeve until it locks in
place.
1
5
/
x 5
/
8
16
11