Using Frequency Copy - Radio Shack PRO-2055 User Manual

Beyond the Basics
fourth line. The scanner has 3 Skywarn channels. Press
d
or to select different Skywarn channels.
e
To activate this function, you must program your
Note Note
desired Skywarn frequencies into the Skywarn
channels.

using frequency copy

You can copy a frequency into a specifi ed channel,
a vacant channel in a specifi ed bank, or a priority
channel. However, you cannot copy a frequency from
the Marine search band.
copying a frequency into a specifi ed channel
You can copy a frequency into a specifi ed channel
when the scanner stops on that frequency during
search mode or manual tuning.
1. Press FUNC then PROG when you fi nd a frequency.
Store in ChXXX ? appears on the bottom line. After
about 1 second, the frequency to be copied fl ashes.
2. Press the desired bank and the channel number
where you want to store the frequency. The display
indicates the bank and channel number. After about
1 second, the frequency to be copied fl ashes.
3. Press ENT. All the conditions such as receive
mode and delay condition are copied onto the
channel. Channel Stored! briefl y appears. The scanner
automatically returns to search mode.
If you try to copy a frequency which is already stored
in the same bank, the scanner sounds the notice tone
3 times after you press ENT. Dupl.Freq. ChXXX appears.
If you want to copy the duplicate frequency anyway,
press ENT, or if not, press CLEAR to cancel.
53