RS-232 Parity
Specifies parity required for sending and receiving data.
Options for this setting are:
•
RS-232 PARITY = NONE
•
RS-232 PARITY = EVEN
•
RS-232 PARITY = ODD
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the bar code below or on the following pages representing the
desired Parity setting. You'll need to cover any unused bar codes, as well
as facing pages to ensure that the scanner reads only the bar code you
intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
001F01(CR)
RS-232 Parity = Even
Product Reference Guide
A setting of no parity with 7 data bits will default to 8
data bits and no parity.
NOTE
Enter/Exit Programming Mode
001F00(CR)
RS-232 Parity = None
001F02(CR)
RS-232 Parity = Odd
225